开云体育

QY100 not responding to external MIDI on MIDI in

Giles Boardman All Messages By This Member #265 开云体育 Hello! Driving myself crazy here. I have more than one QY100 and one appears to have gone rogue. Its versions are 1.36 and 1.00. I can get it to make sounds playing its own keyboard but I can't get it to respond to anything sent to MIDI in. I've tried a? keyboard and a sequence and I have run the MIDI in/out test which came back OK. I am often confused by the MIDI utility page on the QY100, so I don't mess with it if I can avoid it. I would assume I have got something wrong there, except I have tried the same settings on aother unit and they work, and I have tried the settings from the other unit in the rogue unit and they don't. I'd assume a hardware fault if it wasn't for the test result. My other two units have a higher OS version and a lower - 1.38 and 1.04. I've done a factory reset. So, I'm out of ideas and any suggestions would be gratefully received. Best Giles
David Steele All Messages By This Member #266 开云体育 On the qy70 I ?think there’s a setting for midi echo on/off. I’m guessing there might be something similar on the 100. Try that? toggle quoted message Show quoted text On 8 Aug 2021, at 13:55, Giles Boardman <giles.boardman@...> wrote: ? Hello! Driving myself crazy here. I have more than one QY100 and one appears to have gone rogue. Its versions are 1.36 and 1.00. I can get it to make sounds playing its own keyboard but I can't get it to respond to anything sent to MIDI in. I've tried a? keyboard and a sequence and I have run the MIDI in/out test which came back OK. I am often confused by the MIDI utility page on the QY100, so I don't mess with it if I can avoid it. I would assume I have got something wrong there, except I have tried the same settings on aother unit and they work, and I have tried the settings from the other unit in the rogue unit and they don't. I'd assume a hardware fault if it wasn't for the test result. My other two units have a higher OS version and a lower - 1.38 and 1.04. I've done a factory reset. So, I'm out of ideas and any suggestions would be gratefully received. Best Giles
Giles Boardman All Messages By This Member #267 开云体育 Thanks for the suggestion, David. There is such a setting on the QY100 and it's one that catches me out regularly. This turned out to be something different. Hadn't occured to me to check it - there's a host select switch: Midid, PC2, PC1, Mac. I've never had cause to set it, so I must have knocked it. It was on PC2 - as soon as I clicked to MIDI everything was back to normal. Cheers Giles toggle quoted message Show quoted text From: [email protected] <[email protected]> on behalf of David Steele <davidsteele2112@...> Sent: 08 August 2021 15:19 To: [email protected] <[email protected]> Subject: Re: [YamahaQY70AndQY100] QY100 not responding to external MIDI on MIDI in ? On the qy70 I ?think there’s a setting for midi echo on/off. I’m guessing there might be something similar on the 100. Try that? On 8 Aug 2021, at 13:55, Giles Boardman <giles.boardman@...> wrote: ? Hello! Driving myself crazy here. I have more than one QY100 and one appears to have gone rogue. Its versions are 1.36 and 1.00. I can get it to make sounds playing its own keyboard but I can't get it to respond to anything sent to MIDI in. I've tried a? keyboard and a sequence and I have run the MIDI in/out test which came back OK. I am often confused by the MIDI utility page on the QY100, so I don't mess with it if I can avoid it. I would assume I have got something wrong there, except I have tried the same settings on aother unit and they work, and I have tried the settings from the other unit in the rogue unit and they don't. I'd assume a hardware fault if it wasn't for the test result. My other two units have a higher OS version and a lower - 1.38 and 1.04. I've done a factory reset. So, I'm out of ideas and any suggestions would be gratefully received. Best Giles
rick Member Profile All Messages By This Member #268 Check to make sure the host select switch is set to midi? I'm not sure if that has anything to do with the problem butt its worth a try toggle quoted message Show quoted text -----Original Message----- From: David Steele <davidsteele2112@...> To: [email protected] Sent: Sun, Aug 8, 2021 7:19 am Subject: Re: [YamahaQY70AndQY100] QY100 not responding to external MIDI on MIDI in On the qy70 I ?think there’s a setting for midi echo on/off. I’m guessing there might be something similar on the 100. Try that? On 8 Aug 2021, at 13:55, Giles Boardman <giles.boardman@...> wrote: ? Hello! Driving myself crazy here. I have more than one QY100 and one appears to have gone rogue. Its versions are 1.36 and 1.00. I can get it to make sounds playing its own keyboard but I can't get it to respond to anything sent to MIDI in. I've tried a? keyboard and a sequence and I have run the MIDI in/out test which came back OK. I am often confused by the MIDI utility page on the QY100, so I don't mess with it if I can avoid it. I would assume I have got something wrong there, except I have tried the same settings on aother unit and they work, and I have tried the settings from the other unit in the rogue unit and they don't. I'd assume a hardware fault if it wasn't for the test result. My other two units have a higher OS version and a lower - 1.38 and 1.04. I've done a factory reset. So, I'm out of ideas and any suggestions would be gratefully received. Best Giles
rick Member Profile All Messages By This Member #269 Check to make sure the host select switch is set to midi? I'm not sure if that has anything to do with the problem butt its worth a try toggle quoted message Show quoted text -----Original Message----- From: Giles Boardman <giles.boardman@...> To: [email protected] <[email protected]> Sent: Sun, Aug 8, 2021 5:55 am Subject: [YamahaQY70AndQY100] QY100 not responding to external MIDI on MIDI in Hello! Driving myself crazy here. I have more than one QY100 and one appears to have gone rogue. Its versions are 1.36 and 1.00. I can get it to make sounds playing its own keyboard but I can't get it to respond to anything sent to MIDI in. I've tried a? keyboard and a sequence and I have run the MIDI in/out test which came back OK. I am often confused by the MIDI utility page on the QY100, so I don't mess with it if I can avoid it. I would assume I have got something wrong there, except I have tried the same settings on aother unit and they work, and I have tried the settings from the other unit in the rogue unit and they don't. I'd assume a hardware fault if it wasn't for the test result. My other two units have a higher OS version and a lower - 1.38 and 1.04. I've done a factory reset. So, I'm out of ideas and any suggestions would be gratefully received. Best Giles
Giles Boardman All Messages By This Member #270 开云体育 Thanks - I don't really understand why it's the answer,? but it is. Must have nudged the switch. I will know to check next time. Am v grateful for your help. Best Giles toggle quoted message Show quoted text From: [email protected] <[email protected]> on behalf of rick via groups.io <rickw999@...> Sent: 08 August 2021 15:51 To: [email protected] <[email protected]> Subject: Re: [YamahaQY70AndQY100] QY100 not responding to external MIDI on MIDI in ? Check to make sure the host select switch is set to midi? I'm not sure if that has anything to do with the problem butt its worth a try -----Original Message----- From: Giles Boardman <giles.boardman@...> To: [email protected] <[email protected]> Sent: Sun, Aug 8, 2021 5:55 am Subject: [YamahaQY70AndQY100] QY100 not responding to external MIDI on MIDI in Hello! Driving myself crazy here. I have more than one QY100 and one appears to have gone rogue. Its versions are 1.36 and 1.00. I can get it to make sounds playing its own keyboard but I can't get it to respond to anything sent to MIDI in. I've tried a? keyboard and a sequence and I have run the MIDI in/out test which came back OK. I am often confused by the MIDI utility page on the QY100, so I don't mess with it if I can avoid it. I would assume I have got something wrong there, except I have tried the same settings on aother unit and they work, and I have tried the settings from the other unit in the rogue unit and they don't. I'd assume a hardware fault if it wasn't for the test result. My other two units have a higher OS version and a lower - 1.38 and 1.04. I've done a factory reset. So, I'm out of ideas and any suggestions would be gratefully received. Best Giles
rick Member Profile All Messages By This Member #271 Glad to be of help! The QY is a great tool. ...Rick toggle quoted message Show quoted text -----Original Message----- From: Giles Boardman <giles.boardman@...> To: [email protected] <[email protected]> Sent: Tue, Aug 10, 2021 4:54 am Subject: Re: [YamahaQY70AndQY100] QY100 not responding to external MIDI on MIDI in Thanks - I don't really understand why it's the answer,? but it is. Must have nudged the switch. I will know to check next time. Am v grateful for your help. Best Giles From: [email protected] <[email protected]> on behalf of rick via groups.io <rickw999@...> Sent: 08 August 2021 15:51 To: [email protected] <[email protected]> Subject: Re: [YamahaQY70AndQY100] QY100 not responding to external MIDI on MIDI in ? Check to make sure the host select switch is set to midi? I'm not sure if that has anything to do with the problem butt its worth a try -----Original Message----- From: Giles Boardman <giles.boardman@...> To: [email protected] <[email protected]> Sent: Sun, Aug 8, 2021 5:55 am Subject: [YamahaQY70AndQY100] QY100 not responding to external MIDI on MIDI in Hello! Driving myself crazy here. I have more than one QY100 and one appears to have gone rogue. Its versions are 1.36 and 1.00. I can get it to make sounds playing its own keyboard but I can't get it to respond to anything sent to MIDI in. I've tried a? keyboard and a sequence and I have run the MIDI in/out test which came back OK. I am often confused by the MIDI utility page on the QY100, so I don't mess with it if I can avoid it. I would assume I have got something wrong there, except I have tried the same settings on aother unit and they work, and I have tried the settings from the other unit in the rogue unit and they don't. I'd assume a hardware fault if it wasn't for the test result. My other two units have a higher OS version and a lower - 1.38 and 1.04. I've done a factory reset. So, I'm out of ideas and any suggestions would be gratefully received. Best Giles

Previous Topic Next Topic