开云体育

Good idea :-) At the Yamaha forums the runner of "Sector101" is known as member 'shadowmask' - as you can see he uses such kind of rotary switch too - as well as with his Waveblade card... which is

I would like a bare PCB so I can build one out of parts I already have, but alas I have a DX7S which is also not the exact same cartridge slot as the mark I.

Maybe this is not problem IMHO, as such card with 4096 or 8192 patches and limited possibility to reprogram (becauser most of potential users have no access to and not enough knowledge about EPROM

Hi Antoine & Andy, thanks for the suggestion ! Of course a rotary switch would have been more reliable ( and more professional-looking ;-), but the DIP switches was cheaper and during construction,

Hi Miks, Thanks, I'll consider doing this ! Chris

Well done, Christophe. I have many ideas like that one, but they rarely end up actually getting built :) I agree with Antoine - DIP switches aren't ideal, not only for ergonomics but because they

Félicitations Christophe! Cool stuff. I have a DX7-II so I won't order one (DX7 to DX7-II cartridge adapters are very rare and insanely expensive). One suggestion, it would greatly improve usability

I'm interested Let me know about total price to USA

Hi Christophe - that's great news! Maybe you want to post your outcome here: http://www.yamahamusicians.com/forum/ There's lot of activity reg. Yamaha synths... Regards, Miks

Hi Daniel & grant, thank you for your answer ! I suspected someone did it before, but didn't look further...Actually, I have a bunch of 27C801 in the bottom of a drawer and wondered what to do with

Great!!!!

Thank you for posting this. As Daniel has mentioned there is perhaps a large amount of pent up demand for something like this. Is there no issue with using the PCB traces as contacts? I know this has

Finally! That’s great! I was waiting for something like this 31 years :-) Merci beaucoup. Depending on the price I could be interested in such cart. If only you offer also programming that EPROM

Hi everybody, I was fed up to boot the computer each time I wanted to try a new SYSEX...so I designed a ROM card for the DX7 built around a 27C801 EPROM ( 1MB ) and ended up with a perfectly working

I love Scarlatti, have performed many of his sonatas and know everything about his music. But - I’m sorry to destroy your toys - this group is dedicated to Yamaha DX. No Scarlatti, no Baroque

You could start experimenting with the Keyboard Level Scaling and Keyboard Rate Scaling on edit parameters for the four operators in the patch. See if you can come closer to what you are looking

Hi Andy and groupies! :) At the risk of being picked on for something, giving away ideas? Showing off? watevah.. I'll attach those 2 files, I don't think as good as uploading into the files section,

The first two links didn't work for me, Teo, but the third one does. There was an error message, for the first two ("Error occurred while downloading the file. Please click here to try again."), so

Scarlatti K. 1 actually sorry. Scarlatti's sonata K. 208 is in this topic: https://groups.yahoo.com/neo/groups/freeboards/conversations/messages/7

Hi and thanks for this opportunity. Using the built in Harpsichord sounds, low & high, in stereo on 2 DX-100s I had transposed to C5 for this high recording but it gets too high and