开云体育

Hey guys im an owner of DX27s - and i remember that some years ago i found an info on LFO speed on DX synths converted to BPM (aproximate) - does anybody knows them or have that info? after owning

Few other examples: Novation Supernova 2.0 has some FM, too. As for creating non harmonic, metallic and clangorous spectra, lot of synths (including monophonic analog ones) have some possibility

There are many synths that can do FM, to a greater or lesser degree. The Access Virus TI that I used to own can do FM, but only 2- or 3-operator at a time. However, the synth is 16-part

If there's no multitimbrality, how you can create "many layers"? I suppose you mean different sounds. Any other solution (like DX7 key level scaling and similar) means compromise because

Someone has to reBrand the DX series - have all 6OP and 4OP with original structure, and have new algorithms and options. And no multi timbral ... one single patch mode on one midi channel, but

to: Martin Tarenskeen I agree with you. Shinnosuke from JAPAN ---In YamahaDX@..., <m.tarenskeen@...> wrote: If I understood correctly you don't need these SysEx dumps to

thanx!!

If I understood correctly you don't need these SysEx dumps to restore the Factory presets. You can just copy the ROM presets to RAM (one by one, not a pleasant job I guess). But why would you want

hello Shinnosuke, i ordered the eproms to nupdate my system. Can you please send as attachment here the sysex data? So i can dump it after the system firmware upgrade? thank you, Maurice ---In

Are you talking about this project? : http://templarseries.atspace.com/pss480.html Looks interesting. Being a C# Net project I hope it will work, or can be made to work, with Mono on Linux

i had a "notion" or an ideal at one time to reconstruct the wave forms using the{ sin pi freq cycle } and make wave files but sometimes i should pinch myself , wake up and not stray into abstract

hack it up lee and lees bro !!!! lets see how far 16/32 bit bus goes! i love it ! charlie

I concur with Daniel- the pinouts tend to be a mirror image with two extra pins for power to the backlight - connecting that directly to the 5v is possibly too bright. Had I thought ahead,I might have

Upon Charlie's advice - I picked up and ST - which is (as with STEEM) another way to edit/dump to DX - It cost me ?1 on ebay! ? ? ________________________________ To: "YamahaDX@..."

? ? I have had problems physically?fitting CZ101/1000 RX17 and TX7 - I think with the latter I stooped to gluing it in place,which is not ideal,but it bypassed messing around trying to create new

I have not checked - but I have replaced the RX17 and TX7 displays with the ebay ones,both of which were relatively easy thanks to the sloping fronts of the devices. I would love to do the Dx100,as

I did not get very far with CZ for the Commodore - the idea now is to build everything into a PC system - it's slow going. The only drives I have are for commodore. ? I am sure Martin is the

just the electrolytics in psu as they are ripple filter caps and they have a life span and suffer fgrom heat

I just change displays on some of my instruments and after some study started to understand more something about all those standards, sizes, connectors, compatibility... For DX100 you can use any

I don't really need it, but this modification is very tempting :-) Not being much of an electronics expert I would like to hear if someone has succesfully replaced the DX100 display with one of