I intend to drive the 13mm into a piece of plastic >8mm thick and grind off the excess ~5mm, unscrewing to hopefully?clean up the threads. Either way I have lots to experiment with.
Could paint the heads whatever color before unscrewing, too.
Sent from ProtonMail for iOS
On Thu, Jan 20, 2022 at 9:02 AM, Ant Goffart <
ant@...> wrote:
As I said before, the shorter screw (on the back panel near the power) is 4 x 8mm. A 13mm screw will be too long here.
Also note, that the length of a screw is usually measured at the length of the threads, not the whole screw.
