thank you, daniel,
(i was secretly hoping, you might have an answer :-)
its a good start, i will experiment and report back (might take me a couple of days)
all best
hans
toggle quoted message
Show quoted text
Am 05.08.2021 um 11:55 schrieb Daniel Forró via groups.io <danforcz@...>:
SY/TG77 has rather complicated way of selecting patches because those times Bank Select command was not yet standardized. Select Direct Program Change mode. Set Device Number to 1.
Try these two possibilities (but I haven’t tried them so maybe I’m wrong):
---------
With Program Change (explanation in the manual is not quite clear):
Send two PC commands on the channel where you want to change patch:
First:
121 for bank Preset 1 patch
118 for bank Preset 2 patch
119 for Internal or Cartridge bank patch (depending on actual patch in Multi)
120 for Cartridge or Internal bank patch (depending on actual patch in Multi)
Second:
0 to 63 for patch in the bank
---------
With SysEx:
Send two SysEx commands:
First: F0 43 10 34 01 0c 00 01 00 V2 F7
where:
c = channel in Multi where patch select should be done
V2:
00 = Internal bank
01 = Cartridge bank
02 = Preset 1 bank
03 = Preset 2 bank
Second: F0 43 10 34 01 0c 00 02 00 V2 F7
where:
V2 = 00 to 3F (to select patch 1 to 64 in the bank)
Let me know if it works.
Daniel Forro
On Aug 5, 2021, at 17:51, hwk <hansw.koch@...> wrote:
(maybe a weird question):
on a TG77, is it possible to change the voices, which make up a multi “on the fly”, with e.g. program change or a sysex command?
i tried to figure out from the manual/midi specs, but couldn?t reach a conclusion.
maybe someone has already tried / knows an answer.
background: on my TX816 i can send individual program changes to each module on its own channel and thus change the composition of it as a “multi instrument”.
now i was wondering if i can achieve the same on a TG77.
thanks in advance,
best
hans
