I know there is a formula for it, I do not know it. All I did was
use as long of a piece that I could keep vertical which ended up
being 25 foot. So do the same, run a piece of ladder line from your
tuner to your delta loop and try that, you may be suprised.
--- In YaesuTuner@..., Kyle N4NSS <n4nss@...> wrote:
How long of 450 ohm line?
ab9lx <ab9lx@...> wrote:
Hello
YES! I made a 540 foot loop for field day and fed with 450 ohm
ladder
line and it worked GREAT! Do it you will be pleased.
--- In YaesuTuner@..., ivorydawn <g7mns@> wrote:
mi5utc wrote:
Hi Group
I have a 80ft delta loop however my tuner cant reach it as the
control
cable is only 16 ft long. Could I feed the corner of my delta
loop
from the tuner using some ladderline ?
Any help / advice would be appreciated..
Syd
MI5UTC
Hi Syd,
They work fine with Ladder Line feed, just keep the ladder line
away
from conducting surfaces, from your description this should not
be
a
problem. Alternatively extend the control line, I would try the
ladder
line first though.
Regards
Andy - G7MNS
___________________________________________________________
To help you stay safe and secure online, we've developed the all
new Yahoo! Security Centre.
---------------------------------
YAHOO! GROUPS LINKS
Visit your group "YaesuTuner" on the web.
To unsubscribe from this group, send an email to:
YaesuTuner-unsubscribe@...
Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
---------------------------------
---------------------------------
Blab-away for as little as 1?/min. Make PC-to-Phone Calls using
Yahoo! Messenger with Voice.
