I bought a second hand Yaesu FT847 and then I was build a isolated interface for DATA IN/OUT port. It works very well but I haven't build null modem cable for CAT control.
I am not familiar with the CAT communication protocol. I use FTDI for PTT control. In FTDI, RX and TX ports are empty and I want to use these ports because I want to using interface one USB cable. Of course, using optocoupler. How can I do it? How should I connect the optocouplers or what kind of circuit should I create?
I use FT847 with SUCCI interface and no problems, I connect FT847 by his cable to SUCCI interface (eBay) you must specified then it is for FT847.
I use it more then 10 years with UCX Log and SatPC32 prgm without problems...
vy 73 Yvan HB9CSM
Le lundi, 30 octobre 2023 à 11:35:19 UTC+1, TA2YGT <asena.34.ask@...> a écrit :
Hello everyone,
I bought a second hand Yaesu FT847 and then I was build a isolated interface for DATA IN/OUT port. It works very well but I haven't build null modem cable for CAT control.
I am not familiar with the CAT communication protocol. I use FTDI for PTT control. In FTDI, RX and TX ports are empty and I want to use these ports because I want to using interface one USB cable. Of course, using optocoupler. How can I do it? How should I connect the optocouplers or what kind of circuit should I create?
On 30 Oct 2023, at 14:45, yvan skopek via groups.io <yvskop@...> wrote:
?
Hello dr om,
I use FT847 with SUCCI interface and no problems, I connect FT847 by his cable to SUCCI interface (eBay) you must specified then it is for FT847.
I use it more then 10 years with UCX Log and SatPC32 prgm without problems...
vy 73 Yvan HB9CSM
Le lundi, 30 octobre 2023 à 11:35:19 UTC+1, TA2YGT <asena.34.ask@...> a écrit :
Hello everyone,
I bought a second hand Yaesu FT847 and then I was build a isolated interface for DATA IN/OUT port. It works very well but I haven't build null modem cable for CAT control.
I am not familiar with the CAT communication protocol. I use FTDI for PTT control. In FTDI, RX and TX ports are empty and I want to use these ports because I want to using interface one USB cable. Of course, using optocoupler. How can I do it? How should
I connect the optocouplers or what kind of circuit should I create?
I’ve just ordered one of these if that’s of any help
Sent from Jeff M0UHF?
On 30 Oct 2023, at 14:45, yvan skopek via groups.io <yvskop@...> wrote:
?
Hello dr om,
I use FT847 with SUCCI interface and no problems, I connect FT847 by his cable to SUCCI interface (eBay) you must specified then it is for FT847.
I use it more then 10 years with UCX Log and SatPC32 prgm without problems...
vy 73 Yvan HB9CSM
Le lundi, 30 octobre 2023 à 11:35:19 UTC+1, TA2YGT <asena.34.ask@...> a écrit :
Hello everyone,
I bought a second hand Yaesu FT847 and then I was build a isolated interface for DATA IN/OUT port. It works very well but I haven't build null modem cable for CAT control.
I am not familiar with the CAT communication protocol. I use FTDI for PTT control. In FTDI, RX and TX ports are empty and I want to use these ports because I want to using interface one USB cable. Of course, using optocoupler. How can I do it? How should I connect the optocouplers or what kind of circuit should I create?
Thx Jeff for answering. It will work fine but I want to isolate between PC and Yaesu.?Does this null modem cable (FTDI,Profilic,CH340 etc.) provide isolation between the PC and Yaesu? As far as I know it doesn't.
Hi, I’m not sure of the question you’re asking exactly, but I think what you are asking requires one of these forget the price just look at the item and find one of these.?
On 30 Oct 2023, at 18:13, Jeff M0UHF <jeff.elliott45@...> wrote:
? Hi, I’m not sure of the question you’re asking exactly, but I think what you are asking requires one of these forget the price just look at the item and find one of these.?
Sent from Jeff M0UHF?
On 30 Oct 2023, at 18:01, Jaime Eloy <cu3ak@...> wrote: