847 and SIGNALINK USB

Gary Gadwa All Messages By This Member #833 Anyone have noise issues with the SIGNALINK USB on MSK144 with the FT-847. My FT847 is quite deaf on 6 meter MSK144 and it seems the issue is Noise with the Signalink USB. I utilize the Data Port on the Rear of the 847 and I use the Signalink Module SLMODHT. The combination works fine on HF but my 847 is very deaf on VHF.....Can't seem to figure out why. Any suggestions? or experience? Gary? W7FSI DN-24
Micky Corrow All Messages By This Member #834 Doesn't the 847 use a different output port for VHF/UHF? Micky K1XH
Gary Gadwa All Messages By This Member #835 All that I know is I am using the Data Port to the Signalink. Gary toggle quoted message Show quoted text On Sun, Oct 22, 2023 at 13:07 Micky Corrow via <opus=[email protected]> wrote: Doesn't the 847 use a different output port for VHF/UHF? Micky K1XH
k9wkj All Messages By This Member #838 On Sun, Oct 22, 2023 at 02:07 PM, Micky Corrow wrote: Doesn't the 847 use a different output port for VHF/UHF? for SSB modes you must use the 1/8" TRS data jack for audio in/out and keying?? the circuit is shown in the manual?? neither of my 847s are deaf? ? not great? but not deaf ??

开云体育