开云体育

COLLINS FILTER YF-115S-02

Butch McCollough #1059 Hello to the group. I'm a new member.? I just acquired an FT-847 and am trying to locate the optional Collins RX filter.? It is the YF-115S-02.? ?Anyone have one laying around that you would sell for less than the King's ransom?? Or do you know where I could find one?? Thanks for any help. ? 73, Butch...K3AFR
k9wkj All Messages By This Member #1060 On Tue, Sep 24, 2024 at 08:38 PM, Butch McCollough wrote: YF-115S-02 I dont have that but I do have a Inrad 2100hz that needs to be rehomed
Butch McCollough #1061 开云体育 Thanks...I'll keep that in mind. On 9/24/2024 21:48, k9wkj wrote: toggle quoted message Show quoted text On Tue, Sep 24, 2024 at 08:38 PM, Butch McCollough wrote: YF-115S-02 I dont have that but I do have a Inrad 2100hz that needs to be rehomed
Richard All Messages By This Member #1063 Hi Butch, i'm not sure if you know but the filters in an FT1000MP Mark V are also compatible in the FT847.? This might expand your ability to locate one.? I searched a long time for the 500 Hz CW filter without luck until I learned about the cross-compatibility.? I was searching "FT847 CW filter" (and variations of) and was finding nothing or listings with rediculous greedBay prices.? Skeptical, I did a lot of image searches for the CW filters for both radios and compared them and they looked the same.? So I took a chance and started searching "FT1000MP CW filter" and in short order I was able to find one being parted out by an FT1000MP owner.? I too am looking for the SSB filter.? A couple of times I almost convinced FT1000MP owners to part with their 2.4 kHz SSB filter but failed.? Someday!? :-) ? ? This was the site where I first discovered the cross compatibility.? Scroll down about half way for the SSB one.
Butch McCollough #1064 Thank you Richard. I was aware of the FT-1000 MP using the same filters. I happened on to that same site as the link you sent to me.? I may pursue that avenue a little more again now.? Thanks so much for letting me know tho. 73, Butch...K3AFR
Andy Bosworth All Messages By This Member #1065 The filter for the 847 is not common. Filter for ft1000 is more frequent. However, there are other radios available, such as Kenwood. A narrow 455 filter from a Kenwood will work, and work well. It's just a question of finding space for it, and connecting two pieces of coax to it. toggle quoted message Show quoted text On Thu, 10 Oct 2024, 20:50 Butch McCollough via , <k3afr=[email protected]> wrote: Thank you Richard. I was aware of the FT-1000 MP using the same filters. I happened on to that same site as the link you sent to me.? I may pursue that avenue a little more again now.? Thanks so much for letting me know tho. 73, Butch...K3AFR

Previous Topic Next Topic