开云体育

VX-_7R Memory Alpha Tags

ad5wb All Messages By This Member #42 Hello All: I just joined the group.? I see it is not very active.? I have a VX-7R which is the first radio I bought when I got my ticket. It has been mostly resting in a closet for some years. I decided to bring it back to life. I am glad I did except for the convoluted manual. Which brings about the request for help. I can see the alpha tags for the memory channels in the VX-7R Commander software (I use it for programming) But try as I may, I cannot get the alpha tags to display. As an example: I am in MG3, Main. The channel has an alpha tag. I do not see it. I have done a full reset. Written to the radio, etc Anyone have any suggestions? Thanks in advance! 73 Leslie, ad5wb
Chris Robinson KF6NFW DMR ID 3153250 All Messages By This Member #43 I am following this. ?i have the RT systems sw for this, and believe this is mostly resolved there, ?but I dont?recall, its been a while since I picked this radio up as well. maybe its time to resurrect?it as well? Sincerely, ?Mr. Chris A. Robinson? ?KF6NFW / WQOQ661 toggle quoted message Show quoted text On Sun, May 7, 2023 at 1:53?PM ad5wb via <ad5wb=[email protected]> wrote: Hello All: I just joined the group.? I see it is not very active.? I have a VX-7R which is the first radio I bought when I got my ticket. It has been mostly resting in a closet for some years. I decided to bring it back to life. I am glad I did except for the convoluted manual. Which brings about the request for help. I can see the alpha tags for the memory channels in the VX-7R Commander software (I use it for programming) But try as I may, I cannot get the alpha tags to display. As an example: I am in MG3, Main. The channel has an alpha tag. I do not see it. I have done a full reset. Written to the radio, etc Anyone have any suggestions? Thanks in advance! 73 Leslie, ad5wb
ad5wb All Messages By This Member #44 It is really a great little radio. I guess I just got busy and it went into storage. I know it worked previously. I am thinking it is how I am calling up the memory station but have not resolved it yet. Cheers! Leslie On Sunday, May 7, 2023 at 05:19:48 PM CDT, Chris Robinson KF6NFW DMR ID 3153250 <kf6nfw@...> wrote: I am following this. ?i have the RT systems sw for this, and believe this is mostly resolved there, ?but I dont?recall, its been a while since I picked this radio up as well. maybe its time to resurrect?it as well? Sincerely, ?Mr. Chris A. Robinson? ?KF6NFW / WQOQ661 toggle quoted message Show quoted text On Sun, May 7, 2023 at 1:53?PM ad5wb via <ad5wb=[email protected]> wrote: Hello All: I just joined the group.? I see it is not very active.? I have a VX-7R which is the first radio I bought when I got my ticket. It has been mostly resting in a closet for some years. I decided to bring it back to life. I am glad I did except for the convoluted manual. Which brings about the request for help. I can see the alpha tags for the memory channels in the VX-7R Commander software (I use it for programming) But try as I may, I cannot get the alpha tags to display. As an example: I am in MG3, Main. The channel has an alpha tag. I do not see it. I have done a full reset. Written to the radio, etc Anyone have any suggestions? Thanks in advance! 73 Leslie, ad5wb
John Earnshaw All Messages By This Member #45 开云体育 To view tag you need to be in single vfo mem mode by using the main n sub buttons to select single vfo hold one of them in for a few seconds. Also check when in v/m memory mode menu “Basic setup :11” Name set it will display what is in that memory channel number. Brilliant radio got 2 of them and had them almost 20 years and still use them. de M0JFE ? John Earnshaw M0JFE aka Beanpole or 26DT281 Tel:- 07940815659 “Ride the waves and make new friends” ? toggle quoted message Show quoted text From: ad5wb via groups.io Sent: 07 May 2023 23:47 To: [email protected]; [email protected] Subject: Re: [Yaesu-VX-7R-VX-8R] VX-_7R Memory Alpha Tags ? It is really a great little radio. ? I guess I just got busy and it went into storage. I know it worked previously. I am thinking it is how I am calling up the memory station but have not resolved it yet. Cheers! Leslie ? On Sunday, May 7, 2023 at 05:19:48 PM CDT, Chris Robinson KF6NFW DMR ID 3153250 <kf6nfw@...> wrote: ? ? I am following this. ?i have the RT systems sw for this, and believe this is mostly resolved there, ?but I dont?recall, its been a while since I picked this radio up as well. maybe its time to resurrect?it as well? Sincerely, ?Mr. Chris A. Robinson? ?KF6NFW / WQOQ661 ? ? ? On Sun, May 7, 2023 at 1:53?PM ad5wb via <ad5wb=[email protected]> wrote: Hello All: I just joined the group.? I see it is not very active.? I have a VX-7R which is the first radio I bought when I got my ticket. It has been mostly resting in a closet for some years. I decided to bring it back to life. I am glad I did except for the convoluted manual. Which brings about the request for help. I can see the alpha tags for the memory channels in the VX-7R Commander software (I use it for programming) But try as I may, I cannot get the alpha tags to display. As an example: I am in MG3, Main. The channel has an alpha tag. I do not see it. I have done a full reset. Written to the radio, etc Anyone have any suggestions? Thanks in advance! 73 Leslie, ad5wb ? 13279A3D21FB403595B42740504CD401.png
ad5wb All Messages By This Member #46 Yes sir. I had the opportunity to look at the radio last evening. Single VFO memory mode. No alpha tags. Single VFO MG mode. No alpha tags. Going the set up menu: I can see the channels and alpha tags. Not the end of my world that the alpha tags do not display. Just would be nice if they did. I have done a full reset of the radio. I deleted and reinstalled the Commander software. Rewritten the programming to the radio. As noted a tremendous radio! Thanks for your help. Best regards Leslie On Sunday, May 7, 2023 at 07:25:06 PM CDT, John Earnshaw <m0jfe@...> wrote: To view tag you need to be in single vfo mem mode by using the main n sub buttons to select single vfo hold one of them in for a few seconds. Also check when in v/m memory mode menu “Basic setup :11” Name set it will display what is in that memory channel number. Brilliant radio got 2 of them and had them almost 20 years and still use them. de M0JFE ? John Earnshaw M0JFE aka Beanpole or 26DT281 Tel:- 07940815659 “Ride the waves and make new friends” ? toggle quoted message Show quoted text From: ad5wb via groups.io Sent: 07 May 2023 23:47 To: [email protected]; [email protected] Subject: Re: [Yaesu-VX-7R-VX-8R] VX-_7R Memory Alpha Tags ? It is really a great little radio. ? I guess I just got busy and it went into storage. I know it worked previously. I am thinking it is how I am calling up the memory station but have not resolved it yet. Cheers! Leslie ? On Sunday, May 7, 2023 at 05:19:48 PM CDT, Chris Robinson KF6NFW DMR ID 3153250 <kf6nfw@...> wrote: ? ? I am following this. ?i have the RT systems sw for this, and believe this is mostly resolved there, ?but I dont?recall, its been a while since I picked this radio up as well. maybe its time to resurrect?it as well? Sincerely, ?Mr. Chris A. Robinson? ?KF6NFW / WQOQ661 ? ? ? On Sun, May 7, 2023 at 1:53?PM ad5wb via <ad5wb=[email protected]> wrote: Hello All: I just joined the group.? I see it is not very active.? I have a VX-7R which is the first radio I bought when I got my ticket. It has been mostly resting in a closet for some years. I decided to bring it back to life. I am glad I did except for the convoluted manual. Which brings about the request for help. I can see the alpha tags for the memory channels in the VX-7R Commander software (I use it for programming) But try as I may, I cannot get the alpha tags to display. As an example: I am in MG3, Main. The channel has an alpha tag. I do not see it. I have done a full reset. Written to the radio, etc Anyone have any suggestions? Thanks in advance! 73 Leslie, ad5wb ?
pcunite All Messages By This Member #57 To view Memory Channel names: 1: Long press the Main key until only one band is visible. This is a toggle. So, if you see two bands, long press again to show only one band. 2: Short press the V/M key to ensure you are in Memory mode. This is a toggle. Short press until MR is displayed. 3: Short press the MonF key, then press the Main key. This toggles showing large characters vs name tags.
ad5wb All Messages By This Member #58 Thank you!!!! This solved my issue! Very 73 Leslie On Tuesday, July 18, 2023 at 08:11:02 PM CDT, pcunite <pcunite@...> wrote: To view Memory Channel names: 1: Long press the Main key until only one band is visible. This is a toggle. So, if you see two bands, long press again to show only one band. 2: Short press the V/M key to ensure you are in Memory mode. This is a toggle. Short press until MR is displayed. 3: Short press the MonF key, then press the Main key. This toggles showing large characters vs name tags.

Previous Topic Next Topic