Not Transmitting

[email protected] #69 I just go the radio a week ago.? Got the cable and software and loaded and programed.? The radio will not transmit.? No matter what station I am on I can not transmit.? No response.? I have an older radio and a hand held and both receive and transmit on my antenna so there is plenty of signal.? Any ideas or have you heard of anything clashing in the program phase that would stop voice transmission?? Thank
N8AAX STEVE All Messages By This Member #70 Just a couple of things to check. (1) Power Supply - per manual 13.8 VDC @ 15 A is required. ?If insufficient current available transmit will fail. ?You can try setting it down to 5W power level. (2) If power ok, is TX shown on display and led on mic when you key up? - check mic cannection (3j Is the frequency you have set with in transmit freq. for the radio? 2m or 70cm band Entered correctly? (4) Defective coax connection between radio & antenna. Good luck, N8AAX STEVE?

开云体育