开云体育

Just got the radio. ?I set up programmable memory channel scan upper and lower limits, for example VHF Ham L01=144 MHz U01=148 MHz and UHF Ham L02=420 U02=450. ?I can initiate the scan by pressing the up or down button on the mic, but this only works for the UHF and VHF bands. ?I set up air voice frequencies scan L03=118 MHz U03=137 MHz, but this will not scan like the UHF and VHF bands. ?Has anyone else tried this? ?If I scan the air band in VFO mode, I get all the navigation beacons.

John KG7AUP

Just a first cut thought, but do you have aircraft frequencies saved in memory for the memory scan? ?If not, try putting in a few frequencies used locally (Unicom frequencies, local tower or approach - departure, etc) then try again. Remember mode is AM. ?I had problems getting PMS scan to work when I entered limits manually. ?Worked when entered with RT software. ?

N8AAX Steve

So far i'm only programing with rt systems.??