Hello, I am trying to restore an old ft980 that has not led a good life, with many problems, I bought a used vfo board, since yours was very bad, I already have the 30 mhz with a good signal, the 60 mhz are also present, although with less signal, but I can't see the 90 MHz clearly. although the ft980 already receives, but the operation of the vfo is strange, when turning the jumps on the dial they go well, but in reality it varies every 1 khz, I did a reset without success, apart from that I am about 200 khz above the frequency shown , all very strange.
