开云体育

Hello, I am trying to restore an old ft980 that has not led a good life, with many problems, I bought a used vfo board, since yours was very bad, I already have the 30 mhz with a good signal, the 60

Hello, I have the same problem, on the vfo I can see how I go up and down in frequency, but the real change is every khz, I have measured the impulses in (P07 FROM PIN 1 TO PIN8) with an oscilloscope,

Hello, I am trying to restore an ft980 that has had very bad treatment, I have managed to get it back, although the performance is still not the maximum, the problem I have now is with the tuning

about 400 dollars is an acceptable figure

Hello, I have the same problem, on the vfo I can see how I go up and down in frequency, but the real change is every khz, I have measured the impulses in (P07 FROM PIN 1 TO PIN8) with an oscilloscope,

Anyone out there remind me please of VR no for S metre Calib pls 73 Mark

Whilst receiving a strong signal I turned off the AGC. ( STUPID ME ) turning it back on seems to have overloaded the amplifier. With the AGC off it will work as normal backing the RF gain off for

If I were to sell mine (and I don’t intend to) I would not take less than $400 even though it’s 35 plus years old and I know needs some new capacitors and a bit of adjustment. It has never failed

What’s a good price to pay for a clean working ft-980? ? Best place online to look for one?

brian i have a ft-200 the radio receives great on all bands except when the band switch is set to 28.0 thru 29.5 i am getting no receive at all, any suggestions on what the issue may be? thanks marc

paul did you receive the picture of the ft-980? marc

here you are paul the radio tuned on, ham mode again no transmit power at all no cw power at all? need help here! marc

I want the mic lol Cheers -- *M?FOX | Chesterfield UK | IO93HE | Icom IC-7800 | WAB SK46*

Yes that's the one! Looks a flop at the mo but some time left. Best wishes Peter G0 LQU Paul M0FOX wrote:

Sorry but to much guess work....photo the radio as requested and make sure it NOT set to Gen -- *M?FOX | Chesterfield UK | IO93HE | Icom IC-7800 | WAB SK46*

As Wald posted.... -- Just to eliminate the cockpit errors... you are in HAM mode, right?? Not GEN? You probably do not realize how many times I tried to call someone while in GEN mode... So please

If it's the one from St Albans I'm already watching it lol -- *M?FOX | Chesterfield UK | IO93HE | Icom IC-7800 | WAB SK46*

Peter, I did see another 980 with the second fan fitted and that ran from ACC1, is the original fan 13v, maybe as they run continuously from ACC1 that was the intention, never had the lid off busy

Hi Paul. Well actually the second fan on mine is powered from a length of flex and an independent mains plug! Not sure if you could parallel up the original connection to the existing fan to run the

paul the radio is set to the ham band with a great vertical antenna, i tried bot a mic and a keyer and no transmit at all, just great receive??? could this be a power supply problem? when i try to