开云体育

kb3hog, i need help here with this ft-980 i acquired the receive works great i can not get any transmit by mic and key? thanks marc

Please don't be offended but do you hold an amateur radio licence? -- *M?FOX | Chesterfield UK | IO93HE | Icom IC-7800 | WAB SK46*

Is the radio connected to a dummy load or suitable HF antenna? Power it on, chose a ham band and post some photos of the front panel so we can see the frequency and positions of all the knobs

I'd like to connect the fans internally rather than via ACC1 is yours similar,? cheers -- *M?FOX | Chesterfield UK | IO93HE | Icom IC-7800 | WAB SK46*

Paul. There was a mod doing the rounds which involved adding an extra fan on the back plane. The reason was that there are two heat producing modules, the PA unit and the power supply side by side. It

It was bought like this, I can't remember the OM story but he travelled the world with it....seems to function fine -- *M?FOX | Chesterfield UK | IO93HE | Icom IC-7800 | WAB SK46*

Why not download the manual and learn what controls are available? and then what the theory of operation is?. There is so much of this buying broken rigs and then getting on line to see if someone

Is it set to a ham frequency?

is there an alternative power supply that can be connected to the ft-980? can a seperate power supply from an ft-107m work with this radio? thanks marc

Before you attempt to use external supplies you should measure the voltages of the internal supplies.

jean have you ever repaired this radio for no transmit? i am thinking that maybe something is bad in the power supply of the radio and i wanted to know if i can use an external power supply for a

hi jean will a seperate power supply from a yaesu ft-107m work in the ft-980? thanks marc

HI? ! The FT-980 has no external supply connector. But inside thre is a kind of Molex connector, it make the junction between power supply unit to the rest of FT-980. Remain that there a two separate

Hi ! You can find all information in manual section here : /g/Yaesu-FT-980/files/03%20-%20Yaesu%20FT-980%20All%20Manuals/FT-980%20Operating%20Manual The MOX button acts as microphone

is there an alternative power supply that i can connect to the ft-980 ? is it possible to use a power supply from a ft-107m? marc

Brian what does this mox button do???Sent via the Samsung Galaxy Note10+ 5G, an AT&T 5G smartphone

Will it go into transmit if you press the mox button? Will it go into transmit when you hit the Morse key?

hi i just purchased a yaesu ft-980 the radio receives great but i can not? get the mic to key up and transmit, need some help please email me at freilichmst@...

Hi Jones, This 11 m modification is not a change in EPROM. It 's hardware modification to apply the GEN VFO on this 11m band. I described this on a document to get the GEN VFO as a general coverage

OK - You are now a member William.