开云体育

field programming

Rob Burnham All Messages By This Member #11237 i am currently on vacation in the st louis area would like to use the local repeaters unfortunately i don't know how to? program using the keyboard, thanks rob
Edward Maikranz #11238 Have a look here. On Tue, Oct 4, 2011 at 11:15 PM, Rob Burnham <kc2tss@...> wrote: toggle quoted message Show quoted text ? i am currently on vacation in the st louis area would like to use the local repeaters unfortunately i don't know how to? program using the keyboard, thanks rob -- Ed Maikranz KG5UN Abilene, TX Kenwood TS-2000 BC780XLT PRO-2045 PRO-97 Yaesu FT60R
Graham Rowntree All Messages By This Member #11239 Just in case you only have email access at the moment... ? 1. Go into VFO mode using the V/M key 2. type in the receive frequency 3. Press F/W, then 1 to set the squelch type 4. Press F/W, then 2 to set the squelch frequency 5. Hold down F/W for more than a second?and the next available memory location will flash in the top right corner of the display. Use the channel knob to change to another location if required, then press F/W to store. ? If you need a non standard offset for the transmit, repeat the above, but when storing hold down PTT while you press F/W ? Graham G7DKY toggle quoted message Show quoted text On 5 October 2011 12:50, Edward Maikranz <maikranze@...> wrote: ? Have a look here. On Tue, Oct 4, 2011 at 11:15 PM, Rob Burnham <kc2tss@...> wrote: ? i am currently on vacation in the st louis area would like to use the local repeaters unfortunately i don't know how to? program using the keyboard, thanks rob -- Ed Maikranz KG5UN Abilene, TX Kenwood TS-2000 BC780XLT PRO-2045 PRO-97 Yaesu FT60R
Clint Bradford All Messages By This Member #11243 Rob emailed me - got the cheat sheet, and is up and running! -Clint toggle quoted message Show quoted text --- In FT-60@..., Edward Maikranz <maikranze@...> wrote:

Previous Topic Next Topic