开云体育

Hi all.
I tried to post the following bug report with Clint's group, but he
would not allow it.

I found a bug in the radio's operating system software that Yaseu will
want to fix (hopefully).

It is easy to duplicate, and the error handling is not providing for
this, and doing it causes the radio to shut down. Simply set all of
the channels in one of the memory banks to skip, and then press either
the up or down MHz keys to initiate scanning of that bank, and the
unit will shut down.

Yes I know that the question is going to be asked "Why would you want
to scan, when you have set all of the channels to skip?"... well it
happened by accident, and the error should be trapped. The user should
not be left wondering why the unit powered off.

You can duplicate this in any of the memory banks or in the "No
Bank" memory mode. The solution would be to display a message to the
user, or just beep.

I really like my radio, and I'm not complaining, just passing this
along for our collective knowledge, and maybe... just maybe it can be
corrected for future releases.
My unit's serial number 4K 05 0655

BTW I have a VX2R and when I try to duplicate the error on it, a
message is displayed "MS Error"
--Bill

---

Do you Yahoo!?
- You start. We finish.

While I agree that the other FT-60 group is heavily moderated,(trying to be nice here), Clint is not hijacking anybodys email address. All Yahoogroups mailing lists have a feature that allows the moderator to remove any member that he or she wants. It's built into the moderator tools. Nothing illeagal there. I know about the feature because I moderate a few lists of my own.

I do not neccesaarily agree with moderating the postings unless flame wars occur or in cases with vulgar language. I almost started another FT-60 group myself (until I discovered this one) because of the way the other group is run. When somee critisim surfaced about Yaseu that apparently didn't go over too well on the other list.

I do not know Clint. I have no allegance to Yaseu. I can cay that the FT-60 is one outstanding little radio. I have had no problems with mine. The RX sensitivity is fine with my radio. I have even heard the space station repeater almost full quieting with mine. This one is a keeper!

Reguards,

Eric Gissendaner, KF4IXA
President, Collier Emergency Radio Association
Naples, Florida
kf4ixa@...



Larry B wrote:

I have not been kicked off Clint's Group. He would not post my bug
report... but asked that I " Please pass on this report directly to RT
Systems - who was contracted by Yaesu to develop the software package
- thanks!"..
I think Clint thought I was referring to the RT systems software. I
tried to clarify my comments to him, but he has not responded. I did
forward the bug report to RT Systems as requested... who knows maybe
they did write the FT60 operating system for Yaesu.

But Clint is selective in what he will allow, I asked if the RT
Systems software would enable virtual jumper assignment to provide for
MARS/CAP operation, and it has not been posted... seems like a
sensitive subject... but hey, it is his group, and I repsect that --Bill

--- In FT-60@..., Larry B <larryfire26@y...> wrote:

If you subscribe to Clints, FT60 group and you say things that He is

not happy with,here is what he will do!

1, He will hijack your email address and use that to send an

unscribe to you and kick you off the boards!

This is totally illegal as he is actually using your email address,

without your permission maybe the FBI would like to know what he is up
to, as I am sure thats illegal and considered electronic theft and
misuse!

If he is not happy and very biased he should not be running any

discussion groups!

Let him just sell his radios!

After all Disscussion boards are just that. To pass information!


This is just am FYI!! You are better off staying here on this board

as it is run correctly!

Bill Pirtle <won.by.one@s...> wrote:


Hi all.
I tried to post the following bug report with Clint's group, but he
would not allow it.

I found a bug in the radio's operating system software that Yaseu will
want to fix (hopefully).

It is easy to duplicate, and the error handling is not providing for
this, and doing it causes the radio to shut down. Simply set all of
the channels in one of the memory banks to skip, and then press either
the up or down MHz keys to initiate scanning of that bank, and the
unit will shut down.

Yes I know that the question is going to be asked "Why would you want
to scan, when you have set all of the channels to skip?"... well it
happened by accident, and the error should be trapped. The user should
not be left wondering why the unit powered off.

You can duplicate this in any of the memory banks or in the "No
Bank" memory mode. The solution would be to display a message to the
user, or just beep.

I really like my radio, and I'm not complaining, just passing this
along for our collective knowledge, and maybe... just maybe it can be
corrected for future releases.
My unit's serial number 4K 05 0655

BTW I have a VX2R and when I try to duplicate the error on it, a
message is displayed "MS Error"
--Bill








Yahoo! Groups SponsorADVERTISEMENT


---------------------------------
Yahoo! Groups Links

To visit your group on the web, go to:


To unsubscribe from this group, send an email to:
FT-60-unsubscribe@...

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



---------------------------------
Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.

That is probably not the case (regarding hijacking e-mail addresses)

Any moderator/owner of a yahoo group has the ability to unsubscribe or block members from the group within his moderator control functions.

However, I'll agree that list is a bit uptight when it comes to saying anything negative about Yaesu or RT!

Eddie Muro- Amateur Radio Station K2EPM
Long Island, New York
LIMARC Vice-President www.limarc.org





----Original Message Follows----
From: Larry B <larryfire26@...>
Reply-To: FT-60@...
To: FT-60@...
Subject: [FT-60] NOTICE TO ALL
Date: Sun, 31 Oct 2004 13:17:08 -0800 (PST)

If you subscribe to Clints, FT60 group and you say things that He is not happy with,here is what he will do!

1, He will hijack your email address and use that to send an unscribe to you and kick you off the boards!

This is totally illegal as he is actually using your email address, without your permission maybe the FBI would like to know what he is up to, as I am sure thats illegal and considered electronic theft and misuse!


If he is not happy and very biased he should not be running any discussion groups!

Let him just sell his radios!

After all Disscussion boards are just that. To pass information!


This is just am FYI!! You are better off staying here on this board as it is run correctly!



Bill Pirtle <won.by.one@...> wrote:


Hi all.
I tried to post the following bug report with Clint's group, but he
would not allow it.

I found a bug in the radio's operating system software that Yaseu will
want to fix (hopefully).

It is easy to duplicate, and the error handling is not providing for
this, and doing it causes the radio to shut down. Simply set all of
the channels in one of the memory banks to skip, and then press either
the up or down MHz keys to initiate scanning of that bank, and the
unit will shut down.

Yes I know that the question is going to be asked "Why would you want
to scan, when you have set all of the channels to skip?"... well it
happened by accident, and the error should be trapped. The user should
not be left wondering why the unit powered off.

You can duplicate this in any of the memory banks or in the "No
Bank" memory mode. The solution would be to display a message to the
user, or just beep.

I really like my radio, and I'm not complaining, just passing this
along for our collective knowledge, and maybe... just maybe it can be
corrected for future releases.
My unit's serial number 4K 05 0655

BTW I have a VX2R and when I try to duplicate the error on it, a
message is displayed "MS Error"
--Bill








Yahoo! Groups SponsorADVERTISEMENT


---------------------------------
Yahoo! Groups Links

To visit your group on the web, go to:


To unsubscribe from this group, send an email to:
FT-60-unsubscribe@...

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



---------------------------------
Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.

...Clint will hijack your email address...
...This is totally illegal...
...he is actually using your email address...
...the FBI would like to know what he is up to...
...thats illegal and considered electronic theft and misuse!

I am proud of the fact that I do not subject my participant's with
your ignorant rants, Larry.

Clint Bradford

...Clint will hijack your email address...
...This is totally illegal...
...he is actually using your email address...
...the FBI would like to know what he is up to...
...thats illegal and considered electronic theft and misuse!

I am proud of the fact that I do not subject my participant with your
ignorant rants, Larry.

Clint Bradford