开云体育

Is there anything special about the clone cable for this radio? I have a 4 pole to 4 pole lead but the Tx radio shows "error" the Rx sits in "Rx" mode. All I need to do is clone one FT60 to another,

I've done some searching in this forum (and a few other places) and come up empty, so I thought I'd ask. Does this HT have general life expectancy? The reason I'm suspicious of my 20+ year old unit is

Dave, You should be using the NC-88B, 200 mA. The Yaesu model is 351202OO3CT

The Yaesu adapter is SAD-24 for the FT-60R hy. Horace D. KC1TJX

The charger that came with my FT-60 says 12 VDC @ 2 amps, center pin positive, and the manufacturer is Vertex Standard. ? Leroy ? ?AD6LH? Sent from AT&T Yahoo Mail for iPhone

Hi Dave, You need the 12v wall wart at least. I use the SBH-13 cradle. Needs 12v at 1amp! There may be FT60s that will only charge on the cradle. There is also a fast charge cradle. Andrew VK5CV Get

I once noted that the charger I was using brought the battery only up to 7.2 volts.? ??Hmmm......On investigating it looks like I was using the wrong "wall wart" power supply. Now I cant find the

Norbert, battery should be 8.2 .8.4v I would call the place where you bought it from and ask for a new battery. -- Gary KY8M Macomb, MI.

I have tested the charger which reads 12V output. I have tested the battery after being on the charger for 12 hours and it reads 7.2V When I turn on the radio after the battery is fully charged it

Battery voltage is shown on the display when the radio is turned on...what is the voltage. Is it a Yaesu battery or an aftermarket clone? Gordon kc2bw Ray, W4BYG wrote:

Check your charger. Make sure it is producing the voltage needed. Ray, W4BYG -- "The world is desperate for a faith that combines two things: awestruck sight of unshakable divine Truth, and utterly

If you bought it new, then something is not right. All I can think of if the radio is shutting down is there is a defect. Is it still under warranty? ???? On Sun, Oct 13, 2024 at 05:13 PM, Norbert

The radio and battery are about 3 months old I’m surprised that it’s failing already. [email protected]> wrote:

Probably a bad battery. Can you plug the radio into a car cigarette light and get it to work? Do not use the wall wart. Jardy Dawson WA7JRD Message sent by....Oh look!! Pretty lights!!

Sounds like you might need a new battery. How old is the battery. After a full charge -- Gary KY8M Macomb, MI.

After a full charge, every time I key the PTT it seems to drain the battery very quickly and sometimes restarting the radio. Is there a setting that I inadvertently set that would suck that much

Found the "problem". For whatever reason it does not work at all on my Windows 10 laptop, but works like a champ on my Linux computer. Michael WA7SKG

If you cannot get CHIRP to work, try using the FT-60 Commander. Software. You can find this program for free at KC8UNJ.com. Use the alternate write method.? This way, you should be able to tell if it

I have two FT-60R handhelds. I cannot get them to download to CHIRP. I hold the Moni and turn it on, select F8 Clone, hit F/W and it is in clone mode. When I hit PTT, it never goes to ---TX---.

I was strictly referring to the quoted excerpt from the rt systems help files, not the entire thread.? AA3T