开云体育

I have mended my ways ;-) “KG7MQL listening” 73, Rick Sent: Wednesday, June 18, 2014 4:59 AM To: FT-60@... Subject: Re: [FT-60] not very exciting

CQ was originally started on HF using morse code. Short for Seek You (anybody there?). Please don't use it on 2m/440. Kind of like using the Q codes. Not meant for uhf/vhf. Jardy Dawson WA7JRD Ham

246.52 was a mistake. Not a ham frequency. Jardy Dawson WA7JRD Ham Radio Sent by the Underground Railroad,

Congrats!! [FT-60] <FT-60@...> wrote:

I'm glad it was that simple. Have fun. 73, Jim K5JG 'Dean Herrington' herringtons@... [FT-60] wrote:

There is normally (unless agreed to before hand with whomever you want to QSO with) NO tone on the simplex calling freq of 146.52. After you make contact, and wish to continue in simplex, then pick

That is the simplex calling freq. there should be no tone. Jardy Dawson WA7JRD Ham Radio Sent by the Underground Railroad,

Disregard, I missed "simplex"

Tone for 146.52 ???

Yep, roger that.

Thanks to all for your advise. I just make my first contact using a repeater on South Mountain. This repeater is 2.5 miles from my home with a clear line of sight. When I was sitting down outside, the

Thank you, thank you! I was having problems on the av frequencies, too, and couldn't figure out what was wrong. Turns out that my menu item 40, RX MOD, was somehow changed from AUTO to FM (RT

6/18/14 Wednesday morning Many thanks to Dave WB6DHW, and Jim K5JG, for the solution to my problem. Somehow the Operating Settings for aviation frequencies in my RT Systems software had

That is a great analogy. 73, Rick KG7MQL Sent: Wednesday, June 18, 2014 9:40 AM To: FT-60@... Subject: [FT-60] Re: not very exciting start I travel to LA and San

I travel to LA and San Diego for business and have noticed the same thing. Lots of repeaters and no one using them. As others have said here, don't call CQ on 2 Meters, just throw out your call

Brian, You wrote both 146.52 and 246.52. Which one is it or did you mean for me to try both? 73, Rick KG7MQL Sent: Wednesday, June 18, 2014 5:59 AM To:

Brian, I’m confused about operating simplex. I go to VFO and enter a frequency. It shows a “+” and “T” on the display. And consistent with the “+”, my transmit frequency does shift

Ron, Repeaterbook.com only showed one repeater in my area if I’m reading it right. But it was one that the other url didn’t have. Thanks, Rick KG7MQL Sent: Wednesday, June

Larry, I did hear someone say “listening” and another person said “monitoring”. I was unable to reach either one of them. I’m confused by the nomenclature “04/64”. Say I had a

Kelly, I looked a repeater frequencies near my zip code and did fine one. It was not one that I was monitoring but will do so now. Thanks, 73 Rick KG7MQL Sent: Tuesday, June