开云体育

Are the ones you have at all wobbly? I was watching a Ham Radio Crash Course video on You Tube yesterday about connectors and Josh was showing how some are much looser i.e., wobbly than

That's what I've heard. -- 73 Al McManus???? KN6ZVI San Martin, CA

https://www.work-sat.com/images/hamjam-2018/Screenshot%202023-05-26%20at%208.36.32%20AM@... But that all-metal Yaesu CN-3 adapter should be outlawed ... All metal-to-metal contact with your HT's

Alvin, If you reach it from San Martin, N6NFI near the Dish at Stanford has the "9 AM Talk Net" every weekday, open to all hams (no club membership required nor expected). 145.230, 100 Hz PL.

The black adapters--Diamond and the cheaper ones--all have marginal fit. Even with a dab of dielectric grease they can be a struggle to remove. The stainless work much better, even if they don't look

Slap the FBA-23 on the VX-6R, and you have - what? - 300mW TX power for a few minutes Use the FBA-25 on the Ft-60R and you have FULL TX POWER for a few hours. Sure, the VX-6R is cool. Love mine,

So I’ll have to agree/disagree. I do like my ft60 but I like what my VX6R has to offer a bit more.

The Yaesu FT-60R remans the absolute BEST feature set of ANY dual-band FM ham HT. -- Clint Bradford K6LCS http//www.work-sat.com

Great idea. Quality SMA connectors are rated at about 500 connects/disconnects. Protect it with a quality Diamond BNC-to-SMA adapter, and "wear it out" instead of wearing out the HT's

Quality connectors and loss? Maybe 1/3 of one db. Negligible. -- Clint Bradford K6LCS http//www.work-sat.com

I also standardize on BNC for my HHs.? As I use them foot-mobile as well as on better antennas in vehicles or even as p25 monitors in the house, the BNC is a good quick 50 ohm connector.Dave J.?

Hi Al. I agree with standardizing on BNC. All of my HTs have the adapters on them. I use an HT for my mobile radio, so the BNC allows me to easily move to pedestrian mode. I spend very little time

Every connector adds loss. ________________________________ Sent: Thursday, May 25, 2023 7:41:23 PM To: [email protected] <[email protected]> Subject: [Yaesu-FT-60] Antenna connection

I am looking to you Elmer types out there to point me in the direction to a good source of coax and radio antenna adapters.? I am leaning toward a BNC standard for convenience sake. Thoughts???

A 2023 model like I just got is not any different form the 2004 model as far as I can tell, but I've only had my HT since 5/16/22023. -- 73 Al McManus???? KN6ZVI San Martin, CA

New to the group and I am cruising the messages. I saw this and thought I'd stop in to see if the topic question was answered. I just found how to use the Band function myself. -- 73 Al

That is exactly what I was looking in this group for (today)! Thanks so very much. 73 Alvin KN6ZVI

I found that the SBH13 will not work with a 12V supply that is less than 1A. Is yours the original Yaesu plug pack? SAD-16H. Andrew VK5CV Get Outlook for

SBH13 will not charge when the battery voltage is too low. I have got to such situation once. If you are 100% the battery you can connect the battery to a lab power supply with suitably set current

No, not normal at all. Was the battery hot? They don't charge when over a certain temp. Or it could just be a bad battery; It does happen. Either way a blinking red light on a charger generally means