开云体育

I originally loaded Commander on my Win2k machine (because it has a legacy serial port). Then I moved and discovered that my Vista machine also has a legacy serial port. However, when I loaded

Any satellite enthusiasts attending PACIFICON October 14-16 in Santa Clara this month??? I have a table in the main hallway reserved JUST FOR US! How 'bout manning the table for an hour or two

Here ye go: For a Code 10, you must uninstall the drivers and reinstall again. Here are the links to download the latest drivers. XP~32bit DriverLink...

Steve: Can you share the link with us for the new drivers??? Thanks, John KU8Q

I actually got an email back from the cable supplier and a link to a new driver. It worked. Naturally, this only happened after I ordered a new cable from another supplier. Go figure. Thanks

With a battery pack attached, that would not allow maximum transmit power. Supply Voltage: Nominal: 7.2 V DC, Negative Ground Operating: 6.0 ~ 16.0 V DC (EXT DC Jack) 11.0 ~ 16.0 V DC (EXT DC Jack

Noise filtering. Current regulation. Allows radio to work properly - as it requires almost 2A current at 440 key-up (a little less on 2M). Clint, K6LCS 909-241-7666

I bought a cheap knockoff serial cable from taiwan via ebay. It was like 7 bucks after shipping, so I figured if it didn't work I wasn't out much. It works great with XP. I don't have windows 7, and I

I bought a USB cable for the FT-8800R from Kawa Mall on E-Bay. It works fine with Windows 7. I think it came with a driver disk, but I did not need to use it. When I buy stuff on E-bay, I deal with

My answer would be "it depends".? Are you intending to use it in a similar fashion as the original Yaseu supplied wall wart charger for short recharging cycles?? If so, then that's probably ok to do

Here's the deal. I have a variable vote car adapter that adjusts both voltage as well as plugs. If I have it set fore 12 volts, is this okay?

I would like advice on whitch cable to buy to program a FT-60R using Commander software. I prefer a usb cable. Some cable and software combinations do not work at least for me, as tryied the ttl2.usb

sometimes reloading the drivers? sometimes reinserting usb after startup? if you can't get the yellow icon to disappear in dm there is a communication error between the (pc) driver & device/chip if

Here I sit with an empty radio. the Commander software suddenly won't work. I look at the device manager and the prolific USB to serial port adaptor has a yellow icon on it. I'm getting code 10.

Sadly all of repeaters in Auburn, Sacramento, Nevada City, and surrounding areas were asked to reduced their output power to 5w or to move locations - most simply just shut down. This was after

In some countries the bands that amateurs can use are different than here in the US. In order to mistakenly transmit illegally you can place it in Uhf or Vhf only. If the US House of Representatives

That's mostly a repeater/base station issue rather than an HT issue, since you would have to be on the grounds of Beale AFB...

If I recall correctly there is also an option to allow only stored memories to be used. If this was set and there were only memories set for one band, I guess it would make sense to be able to turn

"Off limits"??? I'm not aware of any HT restrictions related to Pave PAWS. It affects repeater location, power and directionality. Although it has led to repeater shutdowns and changes, we have lots

Hi all. Just wondering if anyone has a spare programming cable that I could purchase for the FT-60 please Cheers Tony in Rotherham (ex RAF Gulf War 1 Vet 1990/91)