开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育

FT-101EE Board complement. Is it okay?


 

Hello folks,

I'm trying to find out if the boards on my FT-101EE are proper
enough to work happily together with the radio.
I believe I have some that are okay, but possibly others that might not
be optimum.?

The radio's serial number shown on the back plate is 6N 241468
But there is another label on the side of the inside chassis (just below
where the crystal sockets are) that shows 246107.

I'm a bit confused in the manual where it tells what variation you have
based on S/N. Early, Mid, Late...etc I'm not sure where mine falls.

So here is what I currently have onboard:

BLANKER???? PB1582B
REG ? ?????????? PB1314A
MOD???????????? PB1184A
AUDIO????????? PB1315A
RF???????????????? PB1181B
LO-IF??????????? PB1183C
HF-IF??????????? PB1180

Do any of these look like they might be a problem if they're not
the right iteration of a certain board?

Thanks for any help


Mike
KD7VRG
Tucson, AZ


 

开云体育

This might help, from the Service Manual.

Screenshot 2023-06-29 at 8.53.51 AM.png

On Jun 28, 2023, at 9:54 PM, mikemm58 <mmcauley@...> wrote:

Hello folks,

I'm trying to find out if the boards on my FT-101EE are proper
enough to work happily together with the radio.
I believe I have some that are okay, but possibly others that might not
be optimum.?

The radio's serial number shown on the back plate is 6N 241468
But there is another label on the side of the inside chassis (just below
where the crystal sockets are) that shows 246107.

I'm a bit confused in the manual where it tells what variation you have
based on S/N. Early, Mid, Late...etc I'm not sure where mine falls.

So here is what I currently have onboard:

BLANKER???? PB1582B
REG ? ?????????? PB1314A
MOD???????????? PB1184A
AUDIO????????? PB1315A
RF???????????????? PB1181B
LO-IF??????????? PB1183C
HF-IF??????????? PB1180

Do any of these look like they might be a problem if they're not
the right iteration of a certain board?

Thanks for any help


Mike
KD7VRG
Tucson, AZ


 

开云体育

Thanks Fernando. Yes I have that chart?

My point is, My serial number (241468) doesn't seem to jive with the choices given on the chart for the EE.

The chart gives:

Early 15,000 and down
Mid.? ?15,001 - 20,500
Late.? ?20,501 & up


Mike


-------- Original message --------
From: Fernando Quinones N2FQ <n2fq@...>
Date: 6/29/23 10:19 PM (GMT-07:00)
Subject: Re: [Yaesu-FT-101] FT-101EE Board complement. Is it okay?

This might help, from the Service Manual.

Screenshot 2023-06-29 at 8.53.51 AM.png

On Jun 28, 2023, at 9:54 PM, mikemm58 <mmcauley@...> wrote:

Hello folks,

I'm trying to find out if the boards on my FT-101EE are proper
enough to work happily together with the radio.
I believe I have some that are okay, but possibly others that might not
be optimum.?

The radio's serial number shown on the back plate is 6N 241468
But there is another label on the side of the inside chassis (just below
where the crystal sockets are) that shows 246107.

I'm a bit confused in the manual where it tells what variation you have
based on S/N. Early, Mid, Late...etc I'm not sure where mine falls.

So here is what I currently have onboard:

BLANKER???? PB1582B
REG ? ?????????? PB1314A
MOD???????????? PB1184A
AUDIO????????? PB1315A
RF???????????????? PB1181B
LO-IF??????????? PB1183C
HF-IF??????????? PB1180

Do any of these look like they might be a problem if they're not
the right iteration of a certain board?

Thanks for any help


Mike
KD7VRG
Tucson, AZ


 

开云体育

Perhaps some boards where swapped in the past.

Hope the best for you.

Fernando N2FQ/6

oh.. there is a facebook group if you’re so inclined. “Keeping the Yaesu FT-101 Alive"

On Jun 29, 2023, at 11:12 PM, mikemm58 <mmcauley@...> wrote:

Thanks Fernando. Yes I have that chart?

My point is, My serial number (241468) doesn't seem to jive with the choices given on the chart for the EE.

The chart gives:

Early 15,000 and down
Mid.? ?15,001 - 20,500
Late.? ?20,501 & up


Mike


-------- Original message --------
From: Fernando Quinones N2FQ <n2fq@...>?
Date: 6/29/23 10:19 PM (GMT-07:00)?
Subject: Re: [Yaesu-FT-101] FT-101EE Board complement. Is it okay??

This might help, from the Service Manual.

<Screenshot 2023-06-29 at 8.53.51 AM.png>

On Jun 28, 2023, at 9:54 PM, mikemm58 <mmcauley@...> wrote:

Hello folks,

I'm trying to find out if the boards on my FT-101EE are proper
enough to work happily together with the radio.
I believe I have some that are okay, but possibly others that might not
be optimum.??

The radio's serial number shown on the back plate is 6N 241468
But there is another label on the side of the inside chassis (just below
where the crystal sockets are) that shows 246107.

I'm a bit confused in the manual where it tells what variation you have
based on S/N. Early, Mid, Late...etc I'm not sure where mine falls.

So here is what I currently have onboard:

BLANKER???? PB1582B
REG ? ?????????? PB1314A
MOD???????????? PB1184A
AUDIO????????? PB1315A
RF???????????????? PB1181B
LO-IF??????????? PB1183C
HF-IF??????????? PB1180

Do any of these look like they might be a problem if they're not
the right iteration of a certain board?

Thanks for any help


Mike
KD7VRG
Tucson, AZ



 

On Wed, Jun 28, 2023 at 09:54 PM, mikemm58 wrote:
So here is what I currently have onboard, mine is an E model serial 240595, hope this helps

BLANKER???? PB1582B
REG ? ?????????? PB11547B
MOD???????????? PB1184A
AUDIO????????? PB1315A
RF???????????????? PB1181B
LO-IF??????????? PB1183C
HF-IF??????????? PB1180


 

开云体育

Thank you Don...appreciate it!



Mike


-------- Original message --------
From: Don KC6RHE <donw35@...>
Date: 8/19/23 9:30 AM (GMT-07:00)
Subject: Re: [Yaesu-FT-101] FT-101EE Board complement. Is it okay?

On Wed, Jun 28, 2023 at 09:54 PM, mikemm58 wrote:
So here is what I currently have onboard, mine is an E model serial 240595, hope this helps

BLANKER???? PB1582B
REG ? ?????????? PB11547B
MOD???????????? PB1184A
AUDIO????????? PB1315A
RF???????????????? PB1181B
LO-IF??????????? PB1183C
HF-IF??????????? PB1180