Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
Green/Red LED Lock Mod
I intend to carry out the bi-colour LED lock mod on my FRG-7. Are there any detailed photos or diagrams showing where the 10v, 0v and led lock pickup points are.?
The website of monitor.co.uk shows some info but not sure where to get the 10v from and whilst it shows the 0v and led lock connections I'm not sure on which PCB they are. There used to be a YouTube video from a ham in Finland (I think) which gave detailed instructions but can't find it. Many thanks. David G4EDR.? |
|
开云体育
?I copied the following years ago from:? .? I hope that it helps you.
Neil
"One problem is: where to find the + 10V on the receiver board? I found, about 3 cm in front of the original connection of the red LED wires on the board, a pitch that gives me + 10V, looking for it with a tester between the ground and the various pitches.
The photo below shows the cables to the original LED (where our circuit is connected instead) and the pitch I used for the + 10V (unfortunately I have a faulty camera, none of these photos are mine)
?
Sent from |
|
Many thanks to everyone who has read my post and to those who have replied. I now have all the information required to successfully carry out the mod.
73, David - G4EDR. UPDATE Just completed the mod and it all works great. Despite having access to more modern receivers I always enjoy 'driving the FRG-7 and this mod makes it even better. Again, thanks for the help. |
|
to navigate to use esc to dismiss