开云体育

Hello, For someone who is interested. I've posted a short video on Youtube with the right alignement procedure for the LSB and USB offset. https://www.youtube.com/watch?v=3261CWoSRQE Have fun and

And if you would like to see the digital readout in action, here is a Youtube link: https://youtu.be/HXFUL3ghsbc 73, Marcel de PA8MA

Just a short update about the Ebay link. The previous link has disappeared because I ran out of stock. This is the new one for someone who is interested https://www.ebay.nl/itm/145464409063 Regards,

A quick pic of the few mods I have done to this radio, two diode switched filters, these are? selected via the existing mode switch, SSB/CW? and AM /ANL positions select the narrow, and wide

Here is the plastic lid I used, almost any lid will do, but make sure the wife is away when choosing. I thort bright pink was rather fetching.

The FRG7 has around 12 turns of the tuning knob to cover a 1 meg band segment, pretty fast, requiring the finesse of? safe crackers hands to tune in that ssb station, especially when the machine hs

Here is a simple realignment method requiring few test equipments. https://worldradiohistory.com/UK/Short-Wave-UK/80s/SWM-1981-10.pdf

Thanks again everyone for the responses. I do not own an oscilloscope, been meaning to get one for some time now. I think that is the only way I can get further diagnosing, as I am not used to

NEVER? get? a hot air gun near these old circuit boards. These boards are very poor quality by modern standards and the tracks will be damaged very easily.. L101 is the low frequency RF tuned

I suspect cracked solder joints based on age and the works sometimes. Clean and flux the board, reflow with a hot air gun and I'll bet it's fixed. Then yuo can proceed with the alignment

Thank you Pentagrid for your quick reply. I think you might be onto something. The set functions very rarely I've only gotten it 3-4 times out of dozens of tries. I'll talk more in depth now about

My first guess is the loop section is randomly going into oscillation. Is there any sign the previous owner has "adjusted" any of the tuning coils?? Next time the light wont extinguish, carefully try

Hello Everyone, I just acquired a broken FRG-7. I bought it untested for a decent price. After it arrived I tested it and confirmed my suspicions that the unit was not functioning. It appeared to

Search on eBay: Yaesu FRG-7 kit for digital frequency and S-meter readout [email protected]> wrote:

Seller is 17radioman [email protected]> wrote:

Pentagrid, thank you for your nice idea. I will have a look at it. That would be a nice upgrade for version 2.0. I'm also busy making the readout complete wireless, using 2 times the ESP8266 or ESP32.

Hello Ted, Someone else posted the link already. Thank you for that. I’ve checked it on ebay.co.uk and there you can find it. So yes, I do ship it worldwide. UK should not be any problem.

Hello Marcel, This looks great. I'm very interested, so please would you be so kind as to post the eBay link or item number so I can see it? Also, do you ship to the UK? I did a Worldwide search

On 2023-11-13 13:23, Marcel, de PA8MA wrote: Hello, A few months ago, I've started to make a digital readout for this beautiful radio. After a few new versions,

A very good project Marcel.. Just a suggestion, all the aftermarket add on readouts seem to ignore the megacycle frequency part, when this is very easy to? include. The Mcs counter only needs a