开云体育

Hello, A few months ago, I've started to make a digital readout for this beautiful radio. After a few new versions, it's ready. Because several people asked me for it, I've made a complete kit,

Hello all, As some of you might know, I have designed 3D printable replacement knobs for the FRG-7 switches and have them available through my website ( https://ph2lb.nl/webshop/order.php ) . I

Well the manual says it draws 14VA at 120vac. So to translate that to 12vdc current draw would be:?So 14va*.7 ( .7 is the typ power factor of a std offline ps) = 9.8W of real power. So I = p/v, 9.8/

Hi Guy! Many thanks! 73's / Hans fre. 10. nov. 2023 kl. 21:32 skrev G. Marchal <guy.on5fm@...>:

Hello Hans, Don't worry, the needed current by the Frog is less than 500 mA. I don't use the internal PS of mine since a long time but an external 13.8 V one and I don't need anymore to put the

Max 250mA with the lights on with normal volume.

Hi group, and thanks for having me! Anyone who can tell the current draw for a FRG-7, when using an external 12V PSU? I have a nice linear little PSU, but it's only capable of delivering 0,9 A

The filter board uses diode switching to prevent long signal lines. The diodes on the in/outs of each filter are either forward or reversed biased via a DC voltage to activate, the half rail voltage

Mike, et al, Thanks for the suggestions and pointing me to some of the mod files - I will definitely check them out.? This is now not as urgent as a couple of days ago as I am waiting delivery of a

I would love the schematics you mentioned. These seem like worthy mods! Thanks, Robert

Improving the FRG7 selectivity by replacing filters is problematic when going much beyond a 3-4 kC bandwidth and expecting improved SSB reception. The cause is the Yaesu? free running BFO is just not

radio west upgraded all their FRG-7 filters before shipping and you had the option of further upgrading of the filter including switchable filters

look in the files section for the file Gilfer frg-7 mod, that explains the only way to improve selectivity in the FRG-7 smaller sized filters (based on number of elements) will not require legs to

I am *NOT* and FRG-7 expert. I bought one and completely realligned it. Sensitivity is excellent, but it was designed as a general purpose shortwave receiver, not a communications radio. However, if

I have several murata filters that I have for sale that can significantly improve your selectivity and with a little extra work you can make a two filter system

Hi, Y'all!? Long time Frog owner but first post here.? I'm hoping the collective can help me put this radio into mainstream use in the shack. I have been trying to pair this up with a Heathkit

To start with, a complete alignment according to the service manual. Op zondag 16 juli 2023 om 01:22:59 CEST schreef Chris Rogers via groups.io <crvee8@...>: I have a

Thanks to everyone for their tips. I will do some more investigating and see how i go.

Hi Dayle, Thanks for your advice. I will give it a try and see how I go.

The fault lays in the Wadley loop section . You need to ascertain the Mhz VFO is working, this runs from 55 mHz to 85 mHz. Because your lock light goes out at the higher frequencies, this oscillator