开云体育

thats not what the people on all the audio sites say, do the research please

I would not be so scathing, most transistors sold on Ebay/Aliexpress? are not fakes. Also bear in mind these dual gate FETs are static sensitive and may have been stored/handles incorrectly by

Most transistor sold on eBay are fakes. You should file a claim and get your money back.

Update: New 3SK40 I bought off of Ebay is bad.? Same problem as the old one: G2 is kaput.? So I ordered a NTE222 from Amazon.? Awaiting delivery. I also found the ATTN switch has seen an EMP.??

No need to worry about IC Q106, all that section is working, else you would not have the megacycle lock light flashing, this is the mixer chip for the Wadley loop, it takes the VFO and the harmonic

As the saying goes, I am self taught & I had a bad teacher. I got the scope out (means I am desperate) I can see the 1st & 2nd ocs. I can see the lock unlock working & the comb freq on the scope. I

And, if the previous guy has twiddled the 1st IF? coil tuning slugs, it will need a realignment in that section. Correct alignment here is crucial.

Well, it seems the tuneable IF section, 2 to 3 megs is working, the loop section, ie, megacycle selector is working, so the money goes on the second mixer back. This is a juncton FET, it may be open.

Mike - I've seen many of those posts.? Looks like the SMD part is most promising. Dayle - Yes.? All 1MHz segments lock fine. -Bob

Is your "lock LED flashing when tuning through the megacycle tuning?

I think this thread would be useful to anyone working on an FRG7 https://antiqueradios.com/forums/viewtopic.php?t=370837

Also this thread is very useful for you https://antiqueradios.com/forums/viewtopic.php?t=370837

Check this out in reference to the 3SK40 http://amfone.net/Amforum/index.php?topic=16198.0;wap

..I thought I'd give the group a try. Friend gave me an old FRG7 to fix for him.? No fine tune on the front & has some corrosion on the chassis. Symptoms: * Only a light hiss from the speaker with

This radio started as a very neglected FRG7, too rough to repair, too good to throw out. With the help of an angle grinder, the top chassis section was removed, and new alloy chassis plates fitted.

OK TNX! 73 Wilbert PA3DAE

Like said it isn't a original knob and but a after marked one installed by many owners to have a more fine /? course tuning posibility. I have seen this on aprx 50% of the sold FRG-7's in the

Do the knobs rotate at different speeds? If so there may be better fine tuning using the inner knob. 73 Roger VE7LB Sent: Tuesday, March 7, 2023 5:44 AM To: [email protected] Subject:

That is not the original knob

Hi, Can anybody tell if this Sommerkamp FRG-7 tuning knob is an original design for this receiver? I don't see any pictures on the internet with this kind of tuning knob. Tnx! 73 Wilbert