开云体育

This is the direction I am looking to go I would like to find a display that would fit in the window where the drum is right

Thanks, I was thinking only of the kHz dial replacement. The DD-103 is way above what I want to spend for this project, I was thinking of around $25.

Hi Mike, Quite a few digital readouts will work on the FRG-7. The problem is in getting an accurate readout down to 100 Hz. Info on several counters can be found in the Files section folders 5 &

Interested in adding digital readout to the FRG-7 has anyone done this in the past few years? what product did you get ? I see possibilities on the net but I don't want to end up waiting weeks to get

Hi Roger, Lex, I think the operation is much simpler. The pick-off point in the H.GEN will have a comb of frequencies and the FRU-7 has no way of determining which one is selected in the receiver;

Hi Lex, Thanks for adding to the information about the FRU-7 display. I have previously contacted you off list about buying the unit. I gave to much credit to the 70's technology in my first post.

Hello Roger, I used to have one in a FRG-7 which I got from a OM (the FRG-7 belonged to his father (SK OM Joop PA0JPC) and was in a bad shape). The counter worked, but I didn't like the look of it

Hi Lex, Thanks for uploading the Brooks FDU-7 display install instructions. Looking at the instructions I see that it uses two coaxes to count the MHz frequency and the VFO frequency for a 5 or 6

Lex PH2LB <lex@...> added folder */Brooks FDU-7 - logic counting device* --- The following files have been uploaded to the Files area of the [email protected] group. * /Brooks FDU-7 -

At the moment I don't have spare switch which i can take apart to design the knob. When I get my hands on one, I can try to design a switch knob. Or if somebody can give me detailed drawings

Can you do me a power switch?

Hi Steve, Thanks for your work on the FRG-7 schematics. I numbered your new folder 4 - FRG-7 service notes so it will appear near the top of the default Files screen. I converted the two gif

Hi All, I've uploaded a some files to /g/Yaesu-FRG-7/files/FRG-7%20service%20notes/schematics Here's a bit from the covering document. Feedback welcome. Enjoy! "There appear to be a

The following files have been updated in the Files area of the [email protected] group. * //FRG-7 service notes/schematics/FRG Schematic Notes v1.0.pdf (

glad you like it Lex Best wishes Phil https://thepeppermintloungedarwin.blogspot.com/ Sent with [ProtonMail](https://protonmail.com/) Secure Email. ‐‐‐‐‐‐‐ Original Message

The following files have been uploaded to the Files area of the [email protected] group. * /FRG-7 Switch Notes v1.0.pdf ( /g/Yaesu-FRG-7/files/FRG-7 Switch Notes v1.0.pdf

Thank you for linking to my blog. You have also a lot of interesting posts on you blog. Will take this evening catch up on them. -- 73 Lex PH2LB https://www.ph2lb.nl/

Nice job Lex. I linked your blog to my blog. Best wishes Phil VK8MC https://thepeppermintloungedarwin.blogspot.com/ Sent with [ProtonMail](https://protonmail.com/) Secure

Printed one today and it looks good : https://ph2lb.nl/blog/index.php?page=yaesu-frg7-mods#maindialknob -- 73 Lex PH2LB https://www.ph2lb.nl/

For those who are in need of a FRG-7 main dial knob and have a 3D printer, today I took the knob of my Frog and started drawing. The STL files can be download from :