开云体育

Indeed a active loop antenna can work well (when you don't have to much noise in the building). -- 73 Lex PH2LB https://www.ph2lb.nl/

I can recommend this, it is compact, and can be placed inside against a wall. I have one, it works very well. The output cable can be connected to the SO259 aerial connector on the

Hi, could you please document or show some pictures of how you did the emi socket I also have being thinking of doing the same as i have a spare emi socket sitting here unused at the moment How did

I've been prepping my FRG-7 to lend to a gentleman who lives in a 12 x 13 ft room in a nursing facility.. I'm looking for suggestions of what sort of antenna to set up for him. Do I need to connect

The display input connects to the Yaesu tp02 on the AF/IF board, the positive supply to the terminal strip that supplies the lighting, the negative lead grounded. The display will come on/off with the

I am also interested - thanks Marcel Andy G0BZW

Great, thanks for that. Ian G1MZW

Yes, I will share it, no problem.? 5 Other people have asked me for this counter. I'm drawing a pcb for it. It is a prototype at the moment with a buffer amplifier for the HF-input and an opamp for

How do you hook it up?

Latest update: Q105 just doesn't seem to want to mix.? It tests well, but it is producing 42MHz instead of the 2-3MHz. ?? The 2 IFs coming in to it are fine. So I am going to order MPF103's (can't

One easy and cheap way to add a digital frequency display is right here. https://www.aliexpress.com/item/1005005257038382.html Just program the module for an IF shift of -3,455, and it will read the

I second that. AK Sent: dinsdag 25 april 2023 21:09 To: [email protected] Subject: Re: [Yaesu-FRG-7] Digital readout

On 25 Apr 2023 19:13, "Marcel, de PA8MA" <mga.jacobs@...> wrote: Here is my version with a color TFT screen. The startup screen when you switch on the FRG and the digital readout with S-meter.

Here is my version with a color TFT screen. The startup screen when you switch on the FRG and the digital readout with S-meter.

Thank you for your information. That's what I thought already. I have owned a FRG for 30 years ago, and I could not remember if there is a zero beat on carrier in USB position, like the modern

When receiving SSB the BFO is shifted 1.5kHz above or below the carrier frequency for USB or LSB, Most modern receivers allow for this in the frequency display. This is normal. The FRG7 uses a simple

Hi Roger, unfortunately I can't receive WWV here in Europe. But I can receive a Russian time signal on 9.996 MHz. My Frog has a Kokusai filter. So I had to reallign the BFO. In USB position, zero beat

Hi Roger, No I didn't check that. The counter has a calibration routine. I have calibrated it against a high precision Rohde&Schwarz signal generator. So the indication on the display is exact the VFO

Hi Marcel, The display looks good. Have you tried checking it's accuracy with WWV on 5, 10 & 15 MHz? 73 Roger VE7LB

Hello, I saw the discussion about the digital readout. I've just finished one for my FRG. It is based on a OLED display and an Arduino micro pro. I only took the S-meter away, which is still connected