开云体育

FTdx-10 no audio output

wa1tej All Messages By This Member #129 There was no problem with the audio yesterday but now I have no audio out except an occasional brief burst of squelch noise. Anyone have an idea as to how to get audio back? Tnx! 73 de Jack W2INF
Michael Hammel #131 开云体育 Double check all switches, settings and make sure you’re on a valid frequency. G L toggle quoted message Show quoted text On Apr 30, 2023, at 5:40 PM, wa1tej via groups.io <wa1tej@...> wrote: ?There was no problem with the audio yesterday but now I have no audio out except an occasional brief burst of squelch noise. Anyone have an idea as to how to get audio back? Tnx! 73 de Jack W2INF
wa1tej All Messages By This Member #132 Tnx! I did all that & finally reset the radio & squelch. I was then able to program 52.525 FM into M-01. Surprisingly, after the reset the memory channels look like they are mostly already programmed with HF frequencies that I have so far been unable to erase using the manual instructions. On a club member's? advice I've ordered the RT software. As with most Japanese manuals, I don't find this to be easy to use. For example, there are at least 2 different ways to reset the squelch, one requiring a signal gen & the other just the [RF/SQUELCH] control. But one does not mention the other. The glossary is very incomplete also. I have vision problems so spending a lot of time reading it is not a good idea, nor are the videos on YouTube. 73 de Jack On Monday, May 1, 2023 at 11:55:03 AM EDT, Michael Hammel via groups.io <mikeyjay2046@...> wrote: Double check all switches, settings and make sure you’re on a valid frequency. G L toggle quoted message Show quoted text On Apr 30, 2023, at 5:40 PM, wa1tej via groups.io <wa1tej@...> wrote: ?There was no problem with the audio yesterday but now I have no audio out except an occasional brief burst of squelch noise. Anyone have an idea as to how to get audio back? Tnx! 73 de Jack W2INF
[email protected] #133 We are having the same issue with an Ft-60R handheld. Tried resetting to factory defaults and got audio out one time then next time nothing.
wa1tej All Messages By This Member #134 Tim at Yaesu emailed me to turn the squelch full clockwise & reset the radio. I did that & it appears to work. I've only programmed 52.525 FM into M-01 to see if I get any more hangups before spending time programming the other FM & USB channels I want to use. I'm also going to back it up to an SD card so I can recover without going thru the reset. 73 de Jack W2INF SE PA On Monday, May 1, 2023 at 01:34:16 PM EDT, <bjm2363@...> wrote: We are having the same issue with an Ft-60R handheld. Tried resetting to factory defaults and got audio out one time then next time nothing.

Previous Topic Next Topic