开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. YaMoRC-Digikeijs
  2. Topics

RailCom detection

 

I would like to try and test some RailCom futures. At the moment the only available detection unit comes from LoDi. Can that unit be connected directly to the YaMoRC 7010 station on the S88 bus?
 

Based on that page, you're not going to get RailCom on S88, you'd need S88.2. There is a lack of RailCom detectors that will work on other systems (ESU and Roco have ones that only work with their own system). You can use LoDi's interface to connect to Ethernet to connect to iTrain, but AFAICT, their system will not work with JMRI.

These functions are available when operating on the old s88 bus:

  • Occupancy report of the individual blocks with display
  • Short circuit detection of the individual blocks, here via an additional register, which means:
    If a short circuit is detected on output 1.1, for example, 1.9 is reported as occupied. The short circuit can now be displayed on every model railway control system.

--

Alexander Wood

Hartford-New Haven, CT

Modeling the modern era freelanced G&W Connecticut Northern in HO

Digikeijs DR5000 - JMRI - ProtoThrottle - TCS UWT-100 - TCS UWT-50p - Digitrax Simplex



On Mon, Jan 6, 2025 at 6:59?PM Mark via <coolhelirc=[email protected]> wrote:
I would like to try and test some RailCom futures. At the moment the only available detection unit comes from LoDi. Can that unit be connected directly to the YaMoRC 7010 station on the S88 bus?

1 - 2 of 2