开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. YaMoRC-Digikeijs
  2. Topics

Problems between YD7001 and Windigipet 2021 Premium

Mario
 

Good morning.
A colleague from the association in my city has a problem with Windigipet.?
When you put in the program that uses the Yamorc YD7001 with LOCONET, the detours do not respond well after a few minutes pass. Even if you reset all components with the Windigipet program, some move and others do not.
If you use a program like Digikeijs DR5000, everything works fine but you have another problem and that is that if there is a power short, the control panel recognizes it but the program does not.
He uses XPRESSNET as a detection system but in the WIndigipet program only the YD7001 option with LOCONET appears and it has the Xpressnet option.
In case you can help us with this issue.
I take this opportunity to wish you all a happy summer.
Greetings from the south of Spain,
Mario
 

Mario,

What you write is pretty much not understandable for me, in respect to what you mean an try to achive...

It is no miracle that? Digikeijs DR5000 does not work on an YD7001...?

How did you connect WDP ? USB or Network ?

What is XPRESSNET as a detection system ???

Greets,
Karst
Mario
 

First of all, I apologize because I am using Google Translate.
It is connected via USB with a cable less than 2 meters.
And it uses Xpressnet as a detection system.
Thank you very much for your help and interest.
Receive a cordial greeting,
Mario
Mario
 

Use S88N
Digikeijs DR4088 CS
?
DR4088 Setup - Part 1
?
?
 

On Sun, Aug 4, 2024 at 10:00 AM, Mario wrote:
It is connected via USB with a cable less than 2 meters.
And it uses Xpressnet as a detection system.
?
?
Sorry Mario, I still don't understand what you are trying to do.

Maybe you better ask at the WDP forum. The developer of WDP is very familiar with the YD7001.

Greets,
Karst
Mario
 

Good afternoon.
?
What my colleague wants to know is why when I put in Windigipet that has a Yamorc YD7001-E switchboard without using LOCONET but S88 for example the turnouts some of them work and others the program marks as if it has changed but in the layout it has not been modified. If it says that it is a DR5000, everything works correctly but when there is a power failure, the Windigipet program does not mark it.
?
Anyway, I want to thank you for trying to help us and we will ask in the forum that you indicate.
Best regards,

Mario
?
Mario
 

Dear all, good evening.
?
My colleague tells me that now the problem is with the turnouts. When he starts a route, the program starts to change the turnouts but for example, if he has to change 6 turnouts, he only changes 3 of them and of course the route fails. When you tell the program to start the turnouts, you don't move all of them. This didn't happen with the DR5000. What can it be?
?
Thanks for your help.
?
Regards
Mario
?

1 - 7 of 7