开云体育

Come on Karst ??

John Critchley All Messages By This Member #4284 Hi Karst I’ve been hard at work on my second cabinet I like to be neat with wiring and presentation of electronic equipment after all it’s as big a part of the layout and work as the rest It’s just bugging me that the units are marked at 180 to all the previous units as you can see from the picture numbering goes from right to left - just the YD6016LN and ES - I actually like the Blue better than black and the functionality is much better But maybe you could help and send over the graphic so I could re work it by 180 - which I don’t mind doing and sharing Thanks John Sent from my iPhone XR image0.jpeg
karst.drenth All Messages By This Member #4285 On Wed, Apr 24, 2024 at 05:40 AM, John Critchley wrote: that the units are marked at 180 to all the previous units As far as I am concerned, there are no previous versions....? And no, the artwork is not available. Once made the mistake to send the YD7001 to somebody confidentially. Saw the labels later on eBay for sale at 11 € .... ? Greets, Karst ? ? Oh... and as far as I am concerned, Digikeijs ( who made the Artwork themselves or by an "Artist" ) had the wrong orientation. Look at e.g. the DR5000, DR5052, DR5033, DR5039... they all have the Bus-Connections "on top" the old 40xx on the bottom...? ? This were the drawings which I delivered...? ? ... as you can see, that IS the way the YaMoRC modules are labeled....? ? I will check wether I would have the original DK artwork somewhere ;) so you can modify that :) ? ?
John Critchley All Messages By This Member #4286 开云体育 No problem Karst - “you don’t ask you don’t get” but I totally understand I was referring to the prior Digikeijs modules I have been using ?- haha oh well the writing will just have to be upside down on the blue boxes Thanks John XR toggle quoted message Show quoted text On 24 Apr 2024, at 15:04, karst.drenth via groups.io <karst.drenth@...> wrote: ?On Wed, Apr 24, 2024 at 05:40 AM, John Critchley wrote: that the units are marked at 180 to all the previous units As far as I am concerned, there are no previous versions....? And no, the artwork is not available. Once made the mistake to send the YD7001 to somebody confidentially. Saw the labels later on eBay for sale at 11 € .... ? Greets, Karst ? ? Oh... and as far as I am concerned, Digikeijs ( who made the Artwork themselves or by an "Artist" ) had the wrong orientation. Look at e.g. the DR5000, DR5052, DR5033, DR5039... they all have the Bus-Connections "on top" the old 40xx on the bottom...? ? This were the drawings which I delivered...? ? ... as you can see, that IS the way the YaMoRC modules are labeled....? ? I will check wether I would have the original DK artwork somewhere ;) so you can modify that :) ? ? Attachments: dummyfile.0.part dummyfile.1.part
Iain Morrison All Messages By This Member #4288 开云体育 John, ? Carefully cut out the middle of the label, spin it around and stick it back on ? ? Iain Morrison https://wimorrison.com ? ? toggle quoted message Show quoted text From: [email protected] <[email protected]> On Behalf Of John Critchley via groups.io Sent: 24 April 2024 16:23 To: [email protected] Subject: Re: YaMoRC, Digikeijs, JMRI, English Come on Karst ?? ? No problem Karst - “you don’t ask you don’t get” but I totally understand ? I was referring to the prior Digikeijs modules I have been using ?- haha oh well the writing will just have to be upside down on the blue boxes ? Thanks ? John XR On 24 Apr 2024, at 15:04, karst.drenth via groups.io <karst.drenth@...> wrote: ?On Wed, Apr 24, 2024 at 05:40 AM, John Critchley wrote: that the units are marked at 180 to all the previous units As far as I am concerned, there are no previous versions....? And no, the artwork is not available. Once made the mistake to send the YD7001 to somebody confidentially. Saw the labels later on eBay for sale at 11 € .... ? Greets, Karst ? ? Oh... and as far as I am concerned, Digikeijs ( who made the Artwork themselves or by an "Artist" ) had the wrong orientation. Look at e.g. the DR5000, DR5052, DR5033, DR5039... they all have the Bus-Connections "on top" the old 40xx on the bottom...? ? This were the drawings which I delivered...? ? ... as you can see, that IS the way the YaMoRC modules are labeled....? ? I will check wether I would have the original DK artwork somewhere ;) so you can modify that :) ? ? Attachments: dummyfile.0.part dummyfile.1.part
John Critchley All Messages By This Member #4289 开云体育 Thank you Iain for an unusual low tech solution ??? XR toggle quoted message Show quoted text On 24 Apr 2024, at 18:13, Iain Morrison via groups.io <w.iain.morrison@...> wrote: ? John, ? Carefully cut out the middle of the label, spin it around and stick it back on ? ? Iain Morrison https://wimorrison.com ? ? From: [email protected] <[email protected]> On Behalf Of John Critchley via groups.io Sent: 24 April 2024 16:23 To: [email protected] Subject: Re: YaMoRC, Digikeijs, JMRI, English Come on Karst ?? ? No problem Karst - “you don’t ask you don’t get” but I totally understand ? I was referring to the prior Digikeijs modules I have been using ?- haha oh well the writing will just have to be upside down on the blue boxes ? Thanks ? John XR On 24 Apr 2024, at 15:04, karst.drenth via groups.io <karst.drenth@...> wrote: ?On Wed, Apr 24, 2024 at 05:40 AM, John Critchley wrote: that the units are marked at 180 to all the previous units As far as I am concerned, there are no previous versions....? And no, the artwork is not available. Once made the mistake to send the YD7001 to somebody confidentially. Saw the labels later on eBay for sale at 11 € .... ? Greets, Karst ? ? Oh... and as far as I am concerned, Digikeijs ( who made the Artwork themselves or by an "Artist" ) had the wrong orientation. Look at e.g. the DR5000, DR5052, DR5033, DR5039... they all have the Bus-Connections "on top" the old 40xx on the bottom...? ? This were the drawings which I delivered...? ? ... as you can see, that IS the way the YaMoRC modules are labeled....? ? I will check wether I would have the original DK artwork somewhere ;) so you can modify that :) ? ? Attachments: dummyfile.0.part dummyfile.1.part
Mike All Messages By This Member #4290 Either take a photo of what you want and then size it in a graphics program and printout or draw it as you want it. I often make up labels for terminals, control boxes and the layout. I either print on self adhesive labels or on paper, laminate it and stick with double sided tape. These are all on sticky labels. Mike
John Critchley All Messages By This Member #4293 开云体育 Thanks Mike John XR toggle quoted message Show quoted text On 25 Apr 2024, at 14:27, Mike via groups.io <mike_rby@...> wrote: ?Either take a photo of what you want and then size it in a graphics program and printout or draw it as you want it. I often make up labels for terminals, control boxes and the layout. I either print on self adhesive labels or on paper, laminate it and stick with double sided tape. These are all on sticky labels. Mike

Previous Topic Next Topic