开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. YaMoRC-Digikeijs
  2. Topics

Can the YD7001 be used for setting CVs on accessories ?

 

Hi
?
We will shortly have 6 circuit breakers installed on our club layout.? I am giving each of them a unique accessory address before they are installed.
?
I am trying to determine if the YD7001 can be used for changing CVs on the circuit breakers - the circuit breakers support Programming on the Main / Ops Mode Programming.? If it will, does anyone have experience with the steps to achieve this ?
?
If we cannot do this through interfaces on the YD7001, does anyone know if this can be done using JMRI connected to the YD7001 ?? I have found instructions on the 开云体育 JMRI group for how to do this, but it is unclear if the YD7001 will send the commands out on LocoNet to the DR5033 boosters.
?
Thank you for any help you can provide.
?
Jay Lennox
York Railway Modellers - Toronto
 

开云体育

Jay,

?

Just select the Loco PoM or Accessory PoM radio button on the YD7001 programming interface, enter the address for the device, the CV number and then the value.

?

You will need to try both as some people set them as accessory decoder devices (the correct way), but some will make them act like loco decoders ?

?

Iain

From: [email protected] <[email protected]> On Behalf Of Jay Lennox via groups.io
Sent: 20 March 2025 21:25
To: [email protected]
Subject: Can the YD7001 be used for setting CVs on accessories ?

?

Hi

?

We will shortly have 6 circuit breakers installed on our club layout.? I am giving each of them a unique accessory address before they are installed.

?

I am trying to determine if the YD7001 can be used for changing CVs on the circuit breakers - the circuit breakers support Programming on the Main / Ops Mode Programming.? If it will, does anyone have experience with the steps to achieve this ?

?

If we cannot do this through interfaces on the YD7001, does anyone know if this can be done using JMRI connected to the YD7001 ?? I have found instructions on the 开云体育 JMRI group for how to do this, but it is unclear if the YD7001 will send the commands out on LocoNet to the DR5033 boosters.

?

Thank you for any help you can provide.

?

Jay Lennox

York Railway Modellers - Toronto
 

On Thu, Mar 20, 2025 at 02:24 PM, Jay Lennox wrote:
but it is unclear if the YD7001 will send the commands out on LocoNet to the DR5033 boosters.
Nope, that is not unclear ;) As of LocoNet specs, RailSync ( which drives the boosters ) must be a carbon-copy of what the commandstation sends to the track. And so it is done by our command stations, no matter which type :)

Greets,
Karst

1 - 3 of 3