Stuart,

?

Here is what you need.

?

DR4050 Setup Instructions

?

Remove any previously installed applications.

Visit www.digikeijs.com and download the software.

Don’t connect the DR4050 to either the power supply or PC

Find your download file

Open digileds_config_setup folder

Right click on “setup” and then “Run as administrator”

It will end with an error

Repeat the above except this time un-check the install drivers box

It will complete successful this time

You should now have the program installed on your desktop

Plug in ONLY the USB cable to the DR4050 and PC

When you see the driver being installed click on the box for more info

Make note of what port the driver gets installed on

Run the DigiLED Config program

Select the com port

Then plug in the power to the DR4050

Slide one of the sliders and you should see the change in the LEDS

?

If the above fails and depending on what version of Windows you are running you may need to do the following:

?

Remove any previously installed applications.

Right Click on “setup” then click on “Troubleshoot compatibility”?

Select previous version of Windows

Run as Vista

Install only me

Do check drivers box

It will end with an error

Click “Run Program”

This time un-check install drivers box

It will install correctly this time

Close the Compatibility Program

Plug in only the USB cable to the DR4050 and PC

When you see the drive being installed click on the box for more info

Make note of what com port the driver gets installed on

Run the DigiLED Config program

Select the com port

Then plug in the power to the DR4050

Slide one of the sliders and you should see the change in the LEDS

?

You may also try running the DigiLED Config program by right clicking and the Run as administrator

?

Ryan

?

?

Hi,

Has anyone had any success loading and then running the DR4040 DigiLEDs software?? I can get it to install on to my laptop, but it simply won't run at all.

I have a DELL laptop running Windows 10.

Many thanks,

Stuart.