开云体育

Hi all,
I'm trying to use the position received feature of the LDT TT-DEC turntable decoder in conjunction with Rocrail. I have it wired to a YD6016LN using a resistor and diode as per the LDT instructions for the Uhlenbrock 63340 . I don't seem to be able to get it to work. ?Is the YD6016LN suitable for this function? ?The turntable is a Fleischmann 9152, N Gauge.

[YD7001, 2 x DR4088LN, YD6016LN]

Please post a picture how you connected the TT-DEC to the YD6016LN.

Best is a picture of/with both modules.

?

Greets,

Karst

?

some of the image may appear black - this is just where I've edited the original image and added the YD6016 image

?

Where does that brown wire go ??

To let the YD6016LN-CS to work, it needs to go to the left "C".

But.... if both red and brown go to the bridge, you can not use inputs 2-8 for anything else.

?

Greets,

Karst

?

?

I checked the original schematic.

?

Here you go :)

?

Thanks Karst,

The only difference between my set up and the diagram is that I do not have the extra Bridge occupancy detectors (Shown with an X on the diagram). The detector from the DSU works as my occupancy detector (green circle).
I shall double check that all my wiring works as it should!

Roger