Hi, my name is Allan Grigo. I am the owner of an Xair, and am also
the agent in Western Australia.
To new builders - a couple of things to watch -
When aligning the front wheel with the rudder and drilling the bolt
hole for the front wheel assembly, drill one side first and insert
bolt, before drilling the other side. Don't try to drill the two
holes in one go, otherwise the holes will not line up with the
existing holes.
In relation to all aileron controlled pulleys and nuts under the
floor - make sure all nuts have ample Loctite and pulleys are free to
turn, because once the pod is installed these parts are not
accessible.
Finally - has any tried, or knows anybody who has fitted a 4 stroke
Subaru motor to an Xair. Would appreciate any comments, or knowledge
of this conversion.
Allan Grigo
