开云体育

I have attached to this message and also posted in the files section
under 'oil cable' a series of photographs which show how we add an
additional cable to the standard X-Air cable assembly. This allows for
the installation of the Rotax Oil Injection unit.

The whole process is quite simple and the only important part is to make
sure the swage is done properly with a proper tool.

To save all the experimentation you need to cut the outer cable to 550
mm and the inner cable to 680 mm. These are the correct lengths to fit
without any problems.

I use a knurled adjuster and a cable from a push bike shop.

Thanks Michael X-Air Australia