开云体育

That's what I was thinking and that would be a great easy fix.

This is a long shot but just in case you have forgotten about the lock function next to the tuning knob. Little red button. Regards,Rick Sent from the all new AOL app for Android On Fri, Jul 15,

I would suggest that you (also) email Radioddity support.? They are Xiegu dealers and have pretty good tech support. -------- Doug, K8RFT

Hello, I haven't used my 5105 in a few years.? Charged it up and powered it on, but that is all I can do. It seems as if the rig is locked and non of the buttons respond, except for the power

Different headphones might be more sensitive (louder). I usually use an external speaker, for better sound. -------- Doug, K8RFT

Playing with my new to me 5105 tonight. Headphone volume seems extremely low, even with my hearing deficiency. I’ve searched these archives and the web but not finding a solution. The phones drive

*Hi 73 to all * Have X5105 two weeks..?I immediately noticed the wrong cw monitorig !??although in the description with new firm V3-008 says it's a solved .. not in my case... Yes if you listen on

That is fantastic news, Eric! For those that are interested... It has been a while since I’ve worked with these devices in product development, but `back in the day` I also found working with USB

When I first "upgraded" (I had no choice about that!), WIndows 10 "bricked" my clone PL2303? chip!? An internet search found the method to re-enable it, though.? Win10 loaded a new, factory

Good to hear, Eric. Still ... if you have the JTAG reader, and the radio is in pieces already ...

The PL2303 based USB to serial are a real problem, I have had many of them and almost every one has been thrown in the bin! The problam is that nowadays they are nearly all Chinese clones that do not

*SUCCESS!* What led me to the solution was your comment, Joe. I had never thought to do a loopback test, since the radio appeared to be connecting from what I saw in the terminal (i.e. I was getting

That is good to know. Since you seems to be receiving okay, I assume this would work fine but... Did you try a loopback test jumping TX and RX on the plug end of the USB to Serial cable where you

Hi Joe, Yes, I've actually tried not only that build, but the version 3 beta and even the older version 1.0.x listed elsewhere on that same page. Unfortunately, the LEDs have never blinked during any

Are you trying the build 008 found here? https://xiegu.eu/downloads/ <https://xiegu.eu/downloads/> In the pdf file it shows the Data LED blinking when uploading the code. I also noticed that there

Hi Cesar, Yes, I've followed those same instructions to the letter, but on my radio it doesn't work.? The radio has been running on a nice heavy duty 13.8V Daiwa power supply.? I did double check

As James says, it is necessary to power the X5105 with 13.8 volts and update as indicated in: https://www.radioddity.com/blogs/all/how-to-update-xiegu-x5105-firmware-2021-latest-guidance it is very

Hi James, Yes, I'm trying to move from 1.0.x to the 3.0.0.? I've tried the method you describe with the battery disconnected, but it didn't seem to make any difference.? The terminal ignores the

Oh, and I'm using a Digimode-4 ( http://xggcomms.com/Xiegu--Wouxon-Shop(2066631).html ) USB adapter. Needs to be TTL levels I believe.

This sounds very like the surprise I described in my recent post here? "Firmware update / semi-bricking" ... Bootloader Version B behaves this way - there are two Update Instruction files in the