开云体育

I did find the manual for the old 1.0xx firmware. I am waiting on the usb to serial cable to get here from China (that the previous owner lost) so I can update it. Hopefully ver 3.0 will improve the

Hopefully that means you've downloaded the manual.? If not, they're available in this group's FILES section. -------- Doug, K8RFT

I made the newby mistake. It wouldn’t send cw because it was in practice mode. The 1/8 plug was fine. I bought it used without a manual. Thanks 73 John

I was able to trim the plastic back on my 8-Pin Mini Din cable so it seated properly in the X5105. I ended up not using the CE-19 at all, though. I made this cable

I did the reset and it lost the options setting. Luckily I wrote down the hex string. Seems ok now. Strange that whatever option meant wasn’t preserved. 73s John

I found the setting for code practice (BK off). Now it’s not receiving. Probably did something but no sign of tx or rx now. Did a factory reset. Probably time to quit for now. 73 John

This is now keying the keyer but not transmitting. It came with ver 1.01.04 Feb 2018. Is there a setting for code practice on this old software that prevents transmit? I wasn’t expecting that. I

The 1/8 stereo plug on my paddles is a standard plug. Looking at the data interface kit it shows 1/8 stereo plugs that have a longer plug with a shoulder. I assumed that was to make tip ring and

Hi John, I never had an issue with any of the 1/8” stereo jacks on the X5105; any plug fits and works. I did have an issue with the 8-pin mini-DIN ACC connector jack. A standard DIN plug does

The 1/8 stereo plugs that come with this kit are for reaching the recessed keyer jacks right? Mine didn’t come with any and I want to be sure before I order them on eBay 73 John

In the system menu, option #7 allows Ham or “Wave” (short-/all wave) bands. The All wave band mode works fine on my V3.0 unit and I can tune continuously on HF. Best 73, Lou N2JPR Sent

Has there been any progress on figuring out an All-Band mod for this unit yet? I know the 6100 has an option for this. And while there's an "All Band" type of option in the X5105 settings, it seems to

I turned off the agc and set rf gain to 45. 40 and 75 meters sounded better on a dipole

Great post, Lou.? Very helpful.? I'm going to try your values and see how well they work for me.? I tend to use a bit tighter H- and L-cut values.? For NR, did you mean NB?? That's the one that

No issues that I'm aware of.? If your serial number is X0300190 or higher, follow the version B instructions.? If lower, follow version A instructions.? Recommend V3.00_build008.? Earlier V3

Is there any known issues upgrading probably early hardware to ver 3? Mine is used and has something like 1.0.4 now. 73 John N4HNO

Sounds reasonable. No version of the 5105 does Bluetooth does it? 6100? I’m probably going to use the earbuds anyway due to size. ?Managed to work a few stations on 40 with good reports on TX.

In my last reply, I forgot to mention that, in addition to the audio amplifier I run, I also homebrewed a 4:1 (stereo to mono) audio transformer for the X5105 and other audio-bud type outputs. Yes,

Sent from Mail for Windows Sent: Monday, February 13, 2023 5:52 AM To: [email protected] Subject: [X5105-Users] Audio I read a webpage where the guy said he was told by Xiegu to only use 32

I read a webpage where the guy said he was told by Xiegu to only use 32 ohm headphones) earbuds seems to help some. No rf feedback either. Maybe because I am using it on a dipole fed with coax and