开云体育

I also found the audio amplifier built into the 5105 is easily overdriven and causes distortion which makes the audio sound a lot worse than what it’s actually receiving. What I’ve done to fix

Thanks for the tips. This one is running 1.04. I will do the upgrade when I get a chance. I really like my old Ten Tec R4030 (Youkits rebranded) but I had heard how great the tuner worked. I mostly

Hi John, Bought mine new from MFJ with Ver 3.0 FW. I am a strictly CW operator, with a few listens on SSB. For CW, I have found that by optimizing the filter/audio features, I get awesome

I just got a X5105 and have heard comments about audio being tedious listening with headphones. I have not tried a good external speaker but have tried two pair of headphones and am very disappointed

Thanks, Ronald. I did some checking on sources, and received this note from Radioddity (Xiegu dealer) - Hey Doug, Thanks for reaching out to Radioddity Support! I am Nora and I'd be happy to assist

I saw this article the other day and wanted to share it in the event anyone is looking to replace the battery in their X5105. Replacement battery for the Xiegu X5105? | Q R P e r (

I don’t see the gray highlight over the digit on the screen for selecting tuning rate. I press the arrows and the tuning rate changes but it doesn’t display the block over tens of khz or ones of

Get the usb to serial cable with a FTDI chip. ?If you plan to use the radio for ten and six meter FM repeaters then avoid V3 because you will lose the CTCSS codes. ?Otherwise it’s worth the update

Recommend a USB cable with the FTDI chip.

eBay Sent from Mail for Windows Sent: Wednesday, February 8, 2023 9:32 PM To: [email protected] Subject: [X5105-Users] 1/8 plug cables for paddles The used unit I got came without

The used unit I got came without cables and it looks like they are non standard plugs with a smaller part to fit the jack. Where is a good place to get those along with the usb cable for fw? 73 John

73 I changed several times firmware?for comparison .. my opinion V3 is little better in RX. Menu and display more practical. I solved?defective/delayed cw monitor with one external cw-keyer with

How worthwhile is ver 3 firmware ? I just got a slightly used X5105 with 1.04? firmware. Recommended usb to serial adapter? The previous owner couldn’t find it. I just got it charged and have only

That's a known problem with the X5105.? I had to remove a small amount of plastic around the metal shell of the DIN connector in order to make the connection to the radio work. Some time back, I saw

I just found this group and have some questions about my X5105. I got my unit via MFJ in late 2020 and have made 430 CW QSOs with it. It is a FW V3.0 unit. I have the following issues, to

Try asking for help at Radioddity, the main U.S. seller.? They have pretty good support for the radio. Doug, K8RFT -- -------- Doug, K8RFT

Hi, did you figure this out?? i have the same exact problem.? I had to build a serial/usb device to connect to the radio but have to hold down the power button.? no banana.

Hi there.? I tried to update my firmware and the USB/serial dongle melted.? now the unit will not power up unless i press the two menu buttons and power, then release the menu buttons and continue

As much as I'd like a firmware update, I'm finding the radio complete and working well with the current version.? Can't think of anything to fix.? So whether or not there is one I don't think is all

Great work, Michael!? Thank you very much.? This confirmation of the pin 3 to pin 7 "ground jumper" will be a big help. -- Doug, K8RFT