开云体育

Thank you for the information. I also own the x5105 and it really performs well.

If you're talking about the eBay/Chinese 8-banders, there are reviews on YouTube by various folks, the best of which is DL2MAN's rundown (a couple videos) of the "controls on top" version. VE3SIF has

Can anybody tell me their experiences with the usdr usdx ham radio?

That might not be possible.? I'm not sure of the connections required for the xpa125b , but the CE-19 is a little more than a "cable splitter".? A schematic diagram of its wiring was posted to the

Hi, does anyone know of a commercially available 8-pin DIN to 6-pin DIN cable to connect the x5105 to the xpa125b without needing the CE19? I'd like to reduce the clutter two cables in and out of the

Will we ever see a FW update that fixes the CW decoder problem? It catches my attention to see that there are US $ 100 transeivers that decode perfectly and in X5105 in various versions of FW it does

Is it possible to mod the unit to Tx outside the conventional ham bands?? I'm currently applying for a licence to set up a 40 Mhz low power beacon and using the Xiegu would be handy.

what band was the half wave end fed cut for and what band did this happen on? you should not need a tuner for an half wave end fed, if your half wave end fed is built well and your 1/2 wave length of

Here ar my Settings for Winlink. https://www.do1hfs.de/X5105-Winlink-Setup.html

https://www.do1hfs.de/X5105-Winlink-Setup.html

Thanks Doug. I have found that the din cable that came with my radio seems to fit nicely even though it appears to have that same plastic collar. Greg

The actual cause of the problem of? DIN connector not fitting well was discussed quite a while ago in this forum. It's the X5105 case, and the way that the DIN socket is mounted.? The socket (jack)

Thanks Stuart. I'm going to pass this along to a Steve. I also let him know that this was being discussed in a forum so he may already have access to this. Greg wrote:

I was able to find some images of the 8-Pin Mini DIN male connector on Amazon that was similar to the one used on the xggcoms cable for the Xiegu X5105 transceiver. Looking at the black connector I

I too can confirm the DIN plug issue with the XGG.COMMS interface. Ive had connection issues at the X5105. I havent yet looked for a fix to this problem so if anyone comes up with one please post it

I'm not sure I agree with the instructions part, I blame it more on my lack of reading all the material and setting up my software properly to get CAT working. Greg

I did. In fact, I'm reading his latest response. Greg wrote:

Gregg, The issue of the short Mini DIN ACC and non-operation of the?xggcoms cable USB-Digimode-4 unit that just arrived this week is the issue I am having.? The cable neck appears to be short, and

Stuart, I've been talking with Steve from xggcomms. He's verified the settings below and indeed has helped me get most of mine up and running. My problem has since been the mini din not sitting right

Ben, Can you confirm all of the settings for both the Xiegu X5105 and the??XGGCOMS Soundcard Digimode-4 using the latest Xiegu X5105 software, with Winlink Express. Thanks. -- - Stuart VE3SMF