开云体育

Awesome, thanks for that, found loose standoffs here and problem solved. Actually, two of the pan-head screws for the top standoffs were missing , which can't have helped. Tiny M2x3mm much like the

This radio is working great with no known problems. The Battery charges to 12.36v from a 13.7v supply.? Battery starts at 12.0v off the power supply which is good for 2-4 hours before needing a

Just curious, was the internal battery removed and just use an external battery?

The X5105 mic connection is slightly different than the G106 and X6100.? The MIC BIAS terminal is not in the same position, so an electret mic would not work. The W2ENY $27 adapter did not work on

Randy - Don't forget that in order to actually BE a BNC connector, it has to meet a lot of exact standards. Little doubt that it would fit.? (Just don't buy a pack of 100!) -- -------- Doug, K8RFT

I have not looked inside my X5105, but from some pictures, it seems that the BNC connector could be like some BNC connectors that I got from Digikey (TE Connectivity AMP Connectors PN 5227161-9). I

I concur having provided multiple Xiegu website inquiries with no replies over the last 2 years. Lou N2JPR Sent from Mail for Windows Sent: Wednesday, September 13, 2023 10:43 AM To:

Randy, It may be easier to DIY than deal with Xiegu at any level. Nick Marsh WB4SQI

Thanks everyone. I was provided with a contact at Xiegu, but as you've said here nothing happens. No reply.? I guess I will open it up and look around the connector and see if I can find a

I agree with Doug.? Contacting Xeigu directly is a waste of time.? Don't even bother.? However I have found Alan Clunnie at Sinotel to be extraordinary at customer service.? I can't say enough

The following files and folders have been uploaded to the Files area of the [email protected] group. * /FCC photos of X5105 circuit boards (

I've been with this group since it started, and have never heard of anyone successfully getting anything from Xiegu. But you could try checking with the U.S. dealers, like RadiOddity - they are pretty

Lou, That is GREAT NEWS!!! Glad you got it working again. I took mine apart as there are three boards sandwiched with those standoffs. I did not try just tightening the rear cover screws alone, but

does it do it in keyer and straight key mode?

Hi JP and group, Issue resolved. JP, thank you for indicating the direction of my troubleshooting. Late Saturday evening I attempted to remove the back cover by loosening the 4 screws. To my

Is anyone doing?FT8 with a mac and signalink? TIA Jim KE0OIR 73

Lou, Thank you. I was unable to unlock it with the microphone. Jim KE0OIR 73

Hello this weekend I picked up a 5105 and found that the BNC connector center receptacle is loose.? As in BNC has been used a lot and the center receptacle no longer grips the male pin tightly and

Hi Jim, My first inclination is the Lock button. Could it be enabled? Lou N2JPR Sent from Mail for Windows Sent: Sunday, September 10, 2023 5:51 PM To:

My X5105 has been barely used. I tried ti change the frequency with the?Tuning Dial/Knob, but nothing happens. KE0IR TIA 37