开云体育

Hi Larry!? Have you tried the internal mic to see if the same thing happens?

And you could try cleaning the mic connector contacts, on cable and rig, with contact cleaner spray. -- -------- Doug, K8RFT

JP.? Thanks for replying back.? Found out, maybe , when I lift of push down of the mic connection that goes into tx, it works,? Do I need a new microphone or what. The tx light go on even there in

Larry, what band or mode? When you say transmitting ends, does the red TX light go out? Do you have a wattmeter/dummy load to view output power? JP KA3BWP

What could the problem be?? Thanks

Listening to that tiny speaker in the X5105 will be difficult in any case, but may be impossible from 10 or more feet away.? Have you tried headphones? -- -------- Doug, K8RFT

Also, try listening on the AM Broadcast band, 560 kHz to 1.6 mHz.? there should be plenty of signals to hear. And because the radio is battery powered, you can take it outside, or farther away where

The audio settings may be incorrect, and the "transmit audio tone" is not being generated, or not reaching the radio's audio input. -- -------- Doug, K8RFT

No, it's not. Do you hear any sound at all from the X5105?? Even static noise? "CB radio and from a few feet away it seems like the audio gets through" What does that even mean? -- -------- Doug,

I am receiving signals thru a DE19, but my X5105 does not transmit when WSJT-X is in the transmission mode.

Hi Have you tried listening with the PREamp on? That's the button to the lower left of the speaker. It can also switch on an Attenuator. Try pressing the button a few times and see how the signal

I bought a x5105 and it was just delivered. This is my first HF radio and I have yet to get my general. I've been playing around with it a decent amount and I haven't been able to recieve any signals

thank you, Bruno, for publishing your results.? This may be very helpful. -- -------- Doug, K8RFT

Hello thank you to all of you for having shared your experience for this topic. In the meantime I've performed some test: 1) I utilized the X5105? few hundreds meters far? from a friend of mine who

Hi, when use more than 1:4 compression I got complaints too. So try to use not more than 1:4. I opened the Mic hole a bit and filled the Mic housing with foam. No complaints anymore. BTW EQ is for RX

Maybe your audio is just too weak (quiet) and they can't hear you well.? Try increasing the mic gain. -- -------- Doug, K8RFT

I just use mine on default settings so am also interested in what is suggested Cheers Stevie 2M0UFO

Hi, I'm trying to have some QSO in SSB . I? had? some? but most of people I talk to? is telling me? to improve modulation .? I 'm using the original mike arrived with radio and as? settings? I

Excellent find.? ?Thank you!!!! -- Thank you, Randy AB9GO

The following files and folders have been uploaded to the Files area of the [email protected] group. * /X5105 Board Schematics/Base board.pdf (