开云体育

Yes, there is a command line utility application for the Mac, too. You can follow the steps in the manual. Let us know if you have any questions after that.

Can the firmware be updated with a Mac book? I have a USB connected from Mac to X5105 com port and can see the USB connection on my max as USBSerial-1130 but now what. Is there a program I need to

I forgot the rig was on in the shack and I was working CW on another rig. I thing I overloaded the front end and I'm not ever able to copy the FT8 on 7.075. This sucks! anyway, Is there a known fix

Reason for selling them: Moving to Australia Icom IC-7800? ?... $3,800 ICOM IC 9100: ... $ 2,600 IC-756 Pro III? ?.... $815 Icom PW1: ... $1300 ICOM 7610: ... $2,105 Elecraft K3 w/ P-3 .....

It works without the mic plugged in if DSP-FLT is set to on.? Weird how a receive setting affects it.? But I'm making contacts now and that's the important thing.

Here's a guy using a Malachite SDR receiver as a pandapter.? He has the "backwards" issue, too. https://youtu.be/g7jdPd9SajA

I wanted to see what signals are "on the band" and wished for a radio with a 'real time' bandscope.? The X5105's signal scan feature is sort of helpful, but awkward to use.? And I haven't found a

I only use my X5105 for FT8, and have never plugged in the microphone. (Well, I did actually make one voice contact a couple of years ago, but used the built-in mic.) You could also check with

Thanks for the replies.? The solution was to plug in the mic!? But I'm thinking it's more of a serendipitous workaround than a proper solution.? Do you guys have/need your mics plugged in when

Audio level from PC output setting? (My PC often switches sound to MUTE when I close the laptop lid.? Took a while to figure that one out!) Try transmitting with PC sound output set to "speaker" (of

Congratulations John! My rig came as a V3, so I have no experience with prior versions but glad to hear you were successful. I have gone through tedious profile adjustments so please reach out if I

Uograding to 3.0 fixed this. Alsi got better receive and the missing highlight over active digit for tuning shows up 73 John

Maybe power settings? Best Christian

Hello fellow users, FT8 issue that I've seen asked but can't find the solution: No output from the X5105. Using WSJT-X and flrig on Andy's Ham Radio Linux (xubuntu 22.04) Rig control works and FT8

Hi Justin, I keep mine at +20. Using a Dipole or a Long Wire, it seems to be optimized for best signal strength and least background hash with all DSP/Filters OFF. Your results may vary. Best

Hi, where are you guys setting your RSSI scale. Should it be at 50???

I am waiting for the usb cable to di a firmware update. I am currently on 1.04xx. Every time I turn it on cw is disabled and the buttons are locked

I have read that Xiegu radios use the Icom CAT commands language, and the article suggested setting the IC-7100 as the radio.? That works for my X5105.?? (It does *not* work for programming

Hi all, I had the problem to control my tuner via flrig on my HamPi. My flrig let me only switch the frequency or modulation. I couldn?t find a documentation of the CAT commands for the X5105. The

I have put together some information on a solar power source for 2 types of QRP rigs in the field. https://youtu.be/xPRNmh9trhg