开云体育

I've done a lot of operating from my boats over a period of fifty years all the way from ocean crossings to local cruising and even some kayaking. The only problems I’ve encountered were when

Hmmm!? I wonder if an aluminum-hull boat would make a good antenna counterpoise? I do have an aluminum canoe, and a body of water at my back yard.? But it's got ice fishermen all over it now. --

Related to the list of things to carry, a suggestion would be an antenna like the MFJ-1899T "6 Band Walkabout", much like the Outbacker - but cheaper.? It's a bit heavy on the radio, but

Bob, The X5105 is a good POTA Rig because it only requires an antenna and feedline. Makes POTA easy and less stuff to carry. The 5 watts can be frustrating if the bands are dead. Brian K0FBS -- Brian

Just put my order in with Radioddity for a x5105 and interface.? Looking forward to receiving the rig and giving it a try.? Main interest is POTA and operating from my boat. Bob KT8DX

Looks like the family will be moving me into a room at my daughters house. Probably in about 4-6 weeks! Anyone interested in an X5105? I have two, going to keep one! Emails direct will save cluttering

I am in the same condition. I am looking for a replacement battery and from the Sinotel website they do not export outside the UK. Does anyone know of a store in any country in the world where you can

Thanks for all the input everyone.? Still not completely decided but the 5105 seems to fit the bill nicely for my purposes.? Radioddity seems to have the best price - how are they on service?? And

Thanks Joe for confirming what I described below!

Yes, this is what I did as well. I placed a schematic drawing of the cable I constructed in the group’s file section here: /g/X5105-Users/files/X5105%20ACC%20TRRS%20Cable.pdf

Yes, this is what I did as well. I placed a schematic drawing of the cable I constructed in the group’s file section here: /g/X5105-Users/files/X5105%20ACC%20TRRS%20Cable.pdf

Hi, some additional information here. It is absolutely not necessary to use the CE-19, you can connect the soundcard directly to the ACC connector. The AF_OUT is connected to the Mic input of the

Thanks ..I will try that setting. 73 Rob VE3 LUA

Hi, The settings I use for FT4 and other digital modes are: AGC: Slow Comp: off NR: off Notch: off L IN/OUT: on/on? G-LIN: 6? G-LOUT: 55? (Of course, it does depend on the soudcard settings) the

Rob, I do not have the XPA125 so I am answering from what I have read and seen on YouTube videos. The Smoking Ape did a good one on the XPA125. The XPA125 seems to not put out full power depending on

Hello all, I have a xiegu 5105 with updated firmware and a Xiegu xpa125B amplifier connected through the CE19 from XIegu. The amplifier and tuner work but will not give more then 95 watts output. I

I found that FlRig seems to have some nice features for tracing and logging commands. http://www.w1hkj.com/flrig-help/#ssTRACE I found this reference for the CIV command protocol for ICOM commands,

HI, HamPi can be downloaded from: https://sourceforge.net/projects/hampi/ You need to put the image on an SD card. I chose a 32GB SD card. 73, Dick? DL1CLM

Well done! Thanks so much for writing this up for us! I have been thinking about setting up my X5105 to run headless with my R-Pi 4. The main issue that I have is that the transmitter levels seem to

Hi Doug, I think for MIC input you might need a voltage divider such as this circuit on page 15 http://audiosystemsgroup.com/HamInterfacing.pdf There might be other references, but couldn’t find any