开云体育

The only suggestion I can offer is to turn the VOX on in the 5105 and see if that will activate quick enough to successfully send the “start up” signal for MMSSTV. Brian K0FBS --

Yes, I've got the ce-19 working with all other digital modes like ft8 and jt65call. The problem is there's no settings within MMSTV for Icom ic-7000 in perticular but there is a generic Icom option

Are you using the CAT usb cable that came with the X5105? I've never heard of MMSTV - does it have 'rig control' built in? Do you have "Line In" for audio switched on (in the menu system)? With 'Line

Hi Ben, Settings for an IC-7000 have worked for rig control in WSJTX and JS8CALL. I am not familiar with MMSSTV, does it give you the option of choosing an IC-7000? Also are you using the CE-19

I'm struggling with getting MMSTV to transmit to the x5105. I've tried all the supplied setups within the MMSTV software for rig control but none seem to work with the 5105. I can receive audio from

I'll try the pictures again. These were supposed to be attached to the message about testing the GRA-1899 antenna out in my front yard. -- Doug, K8RFT

I saw two X5105 videos on Youtube that really impressed me, got me thinking about the radio. First I saw one by OM0ET, then one by David, M0DAD.? They were both about making QSOs while walking around

Doug, Sorry, No. Found out about it when I tried the wrong mic !!]

Thanks!? That may be important to future readers.? An earlier thread about a problem trying to use the mic to trigger sending a preprogrammed CW message was the reason for finding the diagram. (He

Doug, The X5105 and G90 microhpnes are NOT interchangeable... BTDT !!

Thanks Doug Tony VK2VF

This page https://www.radioddity.com/products/xiegu-x5105 says Radioddity offers 'authorized service' (image of certificate from Xiegu), so you could ask them about a schematic. I have seen a

The X5105 has stopped transmitting, or more accurately has stopped modulating. There is no output registered on the output power meter in any mode. The SWR scan is all over the [lace on 80m and a flat

Hi Doug, I have exactly the same. If I turn the tuning dial slowly or change the direction of rotation, no pulse is counted and the display does not change. I have this in several devices where

When I tune around on any band, often when I reverse the turning direction, there is a 'click' or two of 'backlash' - no change in frequency with the first click, sometimes not even with the second

www.connectsystems.com is the new dealer and has them in stock )Usual disclaimers) Dave G. KK7SS

Oops!? I meant to also say that when I decided to get one this summer, MFJ was "out of stock."? I asked about when they might get some, and the answer was 'when the new model comes out.'? I've

I see that both Radioddity still sells them. Brian K0FBS -- Brian K0FBS

It might be best to ask those dealers directly.? And to mention the type(s) of support you might need. In the past, MFJ "supported" the units they sold, but apparently the support wasn't always the

Does this mean Radiooddity and MFJ are not supporting these?