开云体育

Serial cable for X1M.

Randy.AB9GO #93 Hello everyone, I recently purchased an X1M but it did not come with the USB cable. What cable is suitable for this?? Can I use a g90 cable and replace the 3.5 mm plug with a DB9 connector or is there something better?? Does it use 3.3 or 5 volt signaling? Thanks, randy.ab9go@... Without knowledge, we are only primates. Any sufficiently advanced technology is indistinguishable from magic. —Arthur C. Clark Sent from my Commodore 64. -- Thanks, Randy. randy.ab9go@...
KK4ITX John All Messages By This Member #94 开云体育 GA Randy, In the Files section you can find a User Manual and probably a schematic to help you out. GL, John KK4ITX? Visit: ?. ? ? toggle quoted message Show quoted text On Jul 9, 2023, at 19:07, Randy.AB9GO <randy.ab9go@...> wrote: Hello everyone, I recently purchased an X1M but it did not come with the USB cable. What cable is suitable for this?? Can I use a g90 cable and replace the 3.5 mm plug with a DB9 connector or is there something better?? Does it use 3.3 or 5 volt signaling? Thanks, randy.ab9go@... Without knowledge, we are only primates. Any sufficiently advanced technology is indistinguishable from magic. —Arthur C. Clark Sent from my Commodore 64. -- Thanks, Randy. randy.ab9go@...
K2DW David All Messages By This Member #95 I bought this one in 2021: ?? And have it working with a X1M and older PI2.? I had a DB9 connector from junk box (let me know if need picture of the pinout);? I also wired a PTT to the DB9 to facilitate manual tuning (ZM-2). 73 --david K2DW toggle quoted message Show quoted text On Mon, Jul 10, 2023 at 12:35?PM Randy.AB9GO <randy.ab9go@...> wrote: Hello everyone, I recently purchased an X1M but it did not come with the USB cable. What cable is suitable for this?? Can I use a g90 cable and replace the 3.5 mm plug with a DB9 connector or is there something better?? Does it use 3.3 or 5 volt signaling? Thanks, randy.ab9go@... Without knowledge, we are only primates. Any sufficiently advanced technology is indistinguishable from magic. —Arthur C. Clark Sent from my Commodore 64. -- Thanks, Randy. randy.ab9go@...
Randy.AB9GO #96 Thanks for the url.? ?It confirmed that the serial connection will work at 3.3 volts.? ?Got one on order.? It wasn't a prime day special though.....? -- Thanks, Randy. randy.ab9go@...
Randy.AB9GO #97 Thanks David.? I could use the DB9 pinout.? The cable should be here later today.? Now to find a DB9M!? Used to run down to Radio Shack or Debco Electronics here locally for such things, but no longer!!! -- Thanks, Randy. randy.ab9go@...

Previous Topic Next Topic