开云体育

Are the members ok to transfer the files from the yahoo group.thanks ian group owner

Yes, go ahead.

The files have been transfered to io .thanks ian

Dennis

Looking for Wavetek 3000-3010 signal generator parts or repairable units. Regards,? Dennis

That's nice, Where in the world are you? Me, Sydney, Australia with 12 assorted modules and two working 3001 sig-gens. (fixed them up a year ago) You are welcome to come here....... Alan VK2ZIW On

I have a SI 4032 I am trying to resurrect. ?I have the SI 4031 manual where “most” of the boards are the same some are not. ?I have a IF Unit failure and unfortunately my IF Unit is different

Hello... I just acquired a 5155A.? It can give any frequency from 100 kHz to 1 GHz with 0.1 Hz resolution.? 4-13 dB amplitude.? No option or capability for modulation or sweep.? It seems to work

Hi Tom, The Service Manual for each entire SM would be supplied based on the serial number and it's fitted parts and options based on that from the factory in Germany. The 4031 manual online is for

Hi! I got some incomplete set of EPROMs for the 4031, and while sorting them out, I made one big mistake. I killed the Slave Computer EPROMs. I probably put the in in reverse direction and that killed

Which slave card 2xx-xxx? I'll have to pull a slave computer card out of one of mine to see how many roms are there. I have a list of firmware that gives CRT-MCU vers 2.58, Host MCU vers 2.82, RF-AF

Hi Mitch! Slave Computer is Board 7 [250-032] and it seems that the unit does show the Slave Computer version as CRT-MCU. 2.58 would be perfect as that is the same version I toasted. These are 27256

Hi, I've just pulled the EPROMs from my slave computer and read them. Being a new user, I'm under moderation, so I can't upload the files just yet. 73 de Jon G4VFT

I still can't upload files. 250-034 SP0 & SP1 v2.58? here, if they're of use to you. https://drive.google.com/open?id=1q9UjrGHDIsZON31rPUdkygjD7ztHadob

You guys are awesome! I'll program the images tonight and do some further testing. Then I check if I can pack a bundle and upload it here in the files section. It's more a legal question than about my

Jonathan, these images where completely right, thank you again! Checksums are correct and the Slave computer is up and running again. Unfortunately the unit has started with a new error, most RF

Hi Ulrich, I'm really pleased to hear the binaries were suitable for you. Sorry to hear you still have issues. Please keep the group posted on your progress. My machine is in the process of having all

I was not sure, if I should continue in this thread with my findings. But if not, I can move it to a new topic, as it is more a helpful hint, if you have the same issues. And I hate it, if I search

Well done Ulrich that is very interesting and thanks to Jon for his help with the data. I think I may have a similar problem with a 4032 and 4031 that have similar issues. On the 4032, the 480 -

Well done Ulrich that is very interesting and thanks to Jon for his help with the data. I think I may have a similar problem with a 4032 and 4031 that have similar issues. On the 4032, the 480 -