开云体育

Unimat Vertical Column

OldToolmaker All Messages By This Member #60770 Is the vertical column diameter the same on both the DB200 and the Unimat 3? -- http://www.homemadetools.net/forum/?OFF-SET-tailstock-center-65965#post105972 ?SMALL TURRET TOOL POST PLANS? ?LARGE TURRET TOOL POST PLANS ?MINI-LATHE CARRIAGE LOCK PLANS ?SMALL QC TOOL POST PLANS? ?QUICK CHANGE LATHE TURRET ?MINI LATHE COMPOUND PIVOT MODIFICATION
Peter Brooks All Messages By This Member #60771 Don’t know about the DB200 but the U3 is around 28mm in diameter.
John Dymke All Messages By This Member #60772 开云体育 SL is 25 mm dia John toggle quoted message Show quoted text On 14 Aug 2023, at 4:26 am, Peter Brooks <peter@...> wrote: ?Don’t know about the DB200 but the U3 is around 28mm in diameter.
Guy Winton All Messages By This Member #60783 The DB etc is 25 mm by memory. toggle quoted message Show quoted text On 08/13/2023 2:26 PM EDT Peter Brooks <peter@...> wrote: ? ? Don’t know about the DB200 but the U3 is around 28mm in diameter.
Berniesbits All Messages By This Member #60795 开云体育 Apologies for the delay. My SL’s vertical post (the original) is 25mm. Bernard ? ? toggle quoted message Show quoted text From: Guy Winton Sent: 14 August 2023 17:23 To: [email protected]; peter@...; OldToolmaker Subject: Re: [Unimat] Unimat Vertical Column ? The DB etc is 25 mm by memory. On 08/13/2023 2:26 PM EDT Peter Brooks <peter@...> wrote: ? ? Don’t know about the DB200 but the U3 is around 28mm in diameter. ? 6BE196E7D92249BFBD40C3E906E15653.png

Previous Topic Next Topic