开云体育

Since getting a Grizzly G4000 9x20 lathe I have been meaning to sell
my Unimat SL-1000.
SWMBO decided that the time has come.

If anyone is interested please contact me off list at
raymeador@....

Thank you all for your time.

Ray in Commerce, TX

I have a 9x20, three 7xs, and a 12x36 in use, and still use my DB200 that I've had for 50 years. Think before you sell it, unless you really need the room, the money, or domestic tranquility.
Mert

mertbaker@...

I have a 9x20, three 7xs, and a 12x36 in use, and still use my DB200 that
I've had for 50 years. Think before you sell it, unless you really need
the room, the money, or domestic tranquility.

Although I have two Monarch 10EEs, a Hardinge TL, and a Logan 820, the
DB/SL (I have one of each) still has a place in my shop: whenever very
small workpieces require machining. Pins, and such.

My SL is more-or-less permanently set-up with a 1/4" indexable carbide
tool, in the Uni toolpost, shimmed as required.

I like Mert's DB/SL QCTP design very much, and when I get the time, I'm
going to make several.

Two, anyway.